Merge pull request #54 from vais-ral/FourthOrderDiffusion

Fourth order diffusion regulariser

15 files changed, 1233 insertions, 532 deletions

diff --git a/Wrappers/Matlab/demos/demoMatlab_3Ddenoise.m b/Wrappers/Matlab/demos/demoMatlab_3Ddenoise.m
index c087433..9a65e37 100644
--- a/Wrappers/Matlab/demos/demoMatlab_3Ddenoise.m
+++ b/Wrappers/Matlab/demos/demoMatlab_3Ddenoise.m
@@ -57,23 +57,38 @@ figure; imshow(u_sb(:,:,15), [0 1]); title('SB-TV denoised volume (CPU)');
 % tic; u_sbG = SB_TV_GPU(single(vol3D), lambda_reg, iter_sb, epsil_tol); toc; 
 % figure; imshow(u_sbG(:,:,15), [0 1]); title('SB-TV denoised volume (GPU)');
 %%
-%%
 fprintf('Denoise a volume using Nonlinear-Diffusion model (CPU) \n');
 iter_diff = 300; % number of diffusion iterations
-lambda_regDiff = 0.06; % regularisation for the diffusivity 
-sigmaPar = 0.04; % edge-preserving parameter
+lambda_regDiff = 0.025; % regularisation for the diffusivity 
+sigmaPar = 0.015; % edge-preserving parameter
 tau_param = 0.025; % time-marching constant 
 tic; u_diff = NonlDiff(single(vol3D), lambda_regDiff, sigmaPar, iter_diff, tau_param, 'Huber'); toc; 
 figure; imshow(u_diff(:,:,15), [0 1]); title('Diffusion denoised volume (CPU)');
 %%
 % fprintf('Denoise a volume using Nonlinear-Diffusion model (GPU) \n');
 % iter_diff = 300; % number of diffusion iterations
-% lambda_regDiff = 0.06; % regularisation for the diffusivity 
-% sigmaPar = 0.04; % edge-preserving parameter
+% lambda_regDiff = 0.025; % regularisation for the diffusivity 
+% sigmaPar = 0.015; % edge-preserving parameter
 % tau_param = 0.025; % time-marching constant 
 % tic; u_diff_g = NonlDiff_GPU(single(vol3D), lambda_regDiff, sigmaPar, iter_diff, tau_param, 'Huber'); toc; 
 % figure; imshow(u_diff_g(:,:,15), [0 1]); title('Diffusion denoised volume (GPU)');
 %%
+fprintf('Denoise using Fourth-order anisotropic diffusion model (CPU) \n');
+iter_diff = 300; % number of diffusion iterations
+lambda_regDiff = 3.5; % regularisation for the diffusivity 
+sigmaPar = 0.02; % edge-preserving parameter
+tau_param = 0.0015; % time-marching constant 
+tic; u_diff4 = Diffusion_4thO(single(vol3D), lambda_regDiff, sigmaPar, iter_diff, tau_param); toc; 
+figure; imshow(u_diff4(:,:,15), [0 1]); title('Diffusion 4thO denoised volume (CPU)');
+%%
+% fprintf('Denoise using Fourth-order anisotropic diffusion model (GPU) \n');
+% iter_diff = 300; % number of diffusion iterations
+% lambda_regDiff = 3.5; % regularisation for the diffusivity 
+% sigmaPar = 0.02; % edge-preserving parameter
+% tau_param = 0.0015; % time-marching constant 
+% tic; u_diff4_g = Diffusion_4thO_GPU(single(vol3D), lambda_regDiff, sigmaPar, iter_diff, tau_param); toc; 
+% figure; imshow(u_diff4_g(:,:,15), [0 1]); title('Diffusion 4thO denoised volume (GPU)');
+%%
 
 %>>>>>>>>>>>>>> MULTI-CHANNEL priors <<<<<<<<<<<<<<< %
 fprintf('Denoise a volume using the FGP-dTV model (CPU) \n');
@@ -107,4 +122,4 @@ epsil_tol =  1.0e-05; % tolerance
 eta =  0.2; % Reference image gradient smoothing constant
 tic; u_fgp_dtv_g = FGP_dTV_GPU(single(vol3D), single(vol3D_ref), lambda_reg, iter_fgp, epsil_tol, eta); toc; 
 figure; imshow(u_fgp_dtv_g(:,:,15), [0 1]); title('FGP-dTV denoised volume (GPU)');
-%%
\ No newline at end of file
+%%
diff --git a/Wrappers/Matlab/demos/demoMatlab_denoise.m b/Wrappers/Matlab/demos/demoMatlab_denoise.m
index d93f477..8289f41 100644
--- a/Wrappers/Matlab/demos/demoMatlab_denoise.m
+++ b/Wrappers/Matlab/demos/demoMatlab_denoise.m
@@ -53,20 +53,37 @@ figure; imshow(u_sb, [0 1]); title('SB-TV denoised image (CPU)');
 %%
 fprintf('Denoise using Nonlinear-Diffusion model (CPU) \n');
 iter_diff = 800; % number of diffusion iterations
-lambda_regDiff = 0.06; % regularisation for the diffusivity 
-sigmaPar = 0.04; % edge-preserving parameter
+lambda_regDiff = 0.025; % regularisation for the diffusivity 
+sigmaPar = 0.015; % edge-preserving parameter
 tau_param = 0.025; % time-marching constant 
 tic; u_diff = NonlDiff(single(u0), lambda_regDiff, sigmaPar, iter_diff, tau_param, 'Huber'); toc; 
 figure; imshow(u_diff, [0 1]); title('Diffusion denoised image (CPU)');
 %%
 % fprintf('Denoise using Nonlinear-Diffusion model (GPU) \n');
 % iter_diff = 800; % number of diffusion iterations
-% lambda_regDiff = 0.06; % regularisation for the diffusivity 
-% sigmaPar = 0.04; % edge-preserving parameter
+% lambda_regDiff = 0.025; % regularisation for the diffusivity 
+% sigmaPar = 0.015; % edge-preserving parameter
 % tau_param = 0.025; % time-marching constant 
 % tic; u_diff_g = NonlDiff_GPU(single(u0), lambda_regDiff, sigmaPar, iter_diff, tau_param, 'Huber'); toc; 
 % figure; imshow(u_diff_g, [0 1]); title('Diffusion denoised image (GPU)');
 %%
+fprintf('Denoise using Fourth-order anisotropic diffusion model (CPU) \n');
+iter_diff = 800; % number of diffusion iterations
+lambda_regDiff = 3.5; % regularisation for the diffusivity 
+sigmaPar = 0.02; % edge-preserving parameter
+tau_param = 0.0015; % time-marching constant 
+tic; u_diff4 = Diffusion_4thO(single(u0), lambda_regDiff, sigmaPar, iter_diff, tau_param); toc; 
+figure; imshow(u_diff4, [0 1]); title('Diffusion 4thO denoised image (CPU)');
+%%
+% fprintf('Denoise using Fourth-order anisotropic diffusion model (GPU) \n');
+% iter_diff = 800; % number of diffusion iterations
+% lambda_regDiff = 3.5; % regularisation for the diffusivity 
+% sigmaPar = 0.02; % edge-preserving parameter
+% tau_param = 0.0015; % time-marching constant 
+% tic; u_diff4_g = Diffusion_4thO_GPU(single(u0), lambda_regDiff, sigmaPar, iter_diff, tau_param); toc; 
+% figure; imshow(u_diff4_g, [0 1]); title('Diffusion 4thO denoised image (GPU)');
+%%
+
 %>>>>>>>>>>>>>> MULTI-CHANNEL priors <<<<<<<<<<<<<<< %
 
 fprintf('Denoise using the FGP-dTV model (CPU) \n');
diff --git a/Wrappers/Matlab/mex_compile/compileCPU_mex.m b/Wrappers/Matlab/mex_compile/compileCPU_mex.m
index b232f33..19eb301 100644
--- a/Wrappers/Matlab/mex_compile/compileCPU_mex.m
+++ b/Wrappers/Matlab/mex_compile/compileCPU_mex.m
@@ -31,6 +31,9 @@ movefile('TNV.mex*',Pathmove);
 mex NonlDiff.c Diffusion_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp"
 movefile('NonlDiff.mex*',Pathmove);
 
+mex Diffusion_4thO.c Diffus4th_order_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp"
+movefile('Diffusion_4thO.mex*',Pathmove);
+
 mex TV_energy.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp"
 movefile('TV_energy.mex*',Pathmove);
 
@@ -41,7 +44,7 @@ movefile('NonlDiff_Inp.mex*',Pathmove);
 mex NonlocalMarching_Inpaint.c NonlocalMarching_Inpaint_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp"
 movefile('NonlocalMarching_Inpaint.mex*',Pathmove);
 
-delete SB_TV_core* ROF_TV_core* FGP_TV_core* FGP_dTV_core* TNV_core* utils* Diffusion_core* CCPiDefines.h
+delete SB_TV_core* ROF_TV_core* FGP_TV_core* FGP_dTV_core* TNV_core* utils* Diffusion_core* Diffus4th_order_core* CCPiDefines.h
 delete Diffusion_Inpaint_core* NonlocalMarching_Inpaint_core*
 fprintf('%s \n', 'Regularisers successfully compiled!');
 
diff --git a/Wrappers/Matlab/mex_compile/compileGPU_mex.m b/Wrappers/Matlab/mex_compile/compileGPU_mex.m
index 46d85a6..6b69c34 100644
--- a/Wrappers/Matlab/mex_compile/compileGPU_mex.m
+++ b/Wrappers/Matlab/mex_compile/compileGPU_mex.m
@@ -42,5 +42,13 @@ movefile('FGP_dTV_GPU.mex*',Pathmove);
 mex -g -I/usr/local/cuda-7.5/include -L/usr/local/cuda-7.5/lib64 -lcudart -lcufft -lmwgpu NonlDiff_GPU.cpp NonlDiff_GPU_core.o
 movefile('NonlDiff_GPU.mex*',Pathmove);
 
-delete TV_ROF_GPU_core* TV_FGP_GPU_core* TV_SB_GPU_core* dTV_FGP_GPU_core* NonlDiff_GPU_core* CCPiDefines.h
-fprintf('%s \n', 'All successfully compiled!');
\ No newline at end of file
+!/usr/local/cuda/bin/nvcc -O0 -c Diffus_4thO_GPU_core.cu -Xcompiler -fPIC -I~/SOFT/MATLAB9/extern/include/
+mex -g -I/usr/local/cuda-7.5/include -L/usr/local/cuda-7.5/lib64 -lcudart -lcufft -lmwgpu Diffusion_4thO_GPU.cpp Diffus_4thO_GPU_core.o
+movefile('Diffusion_4thO_GPU.mex*',Pathmove);
+
+delete TV_ROF_GPU_core* TV_FGP_GPU_core* TV_SB_GPU_core* dTV_FGP_GPU_core* NonlDiff_GPU_core* Diffus_4thO_GPU_core* CCPiDefines.h
+fprintf('%s \n', 'All successfully compiled!');
+
+pathA2 = sprintf(['..' filesep '..' filesep], 1i);
+cd(pathA2);
+cd demos
\ No newline at end of file
diff --git a/Wrappers/Matlab/mex_compile/regularisers_CPU/Diffusion_4thO.c b/Wrappers/Matlab/mex_compile/regularisers_CPU/Diffusion_4thO.c
new file mode 100644
index 0000000..81c0600
--- /dev/null
+++ b/Wrappers/Matlab/mex_compile/regularisers_CPU/Diffusion_4thO.c
@@ -0,0 +1,76 @@
+/*
+ * This work is part of the Core Imaging Library developed by
+ * Visual Analytics and Imaging System Group of the Science Technology
+ * Facilities Council, STFC
+ *
+ * Copyright 2017 Daniil Kazantsev
+ * Copyright 2017 Srikanth Nagella, Edoardo Pasca
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "matrix.h"
+#include "mex.h"
+#include "Diffus4th_order_core.h"
+
+/* C-OMP implementation of fourth-order diffusion scheme [1] for piecewise-smooth recovery (2D/3D case)
+ * The minimisation is performed using explicit scheme. 
+ *
+ * Input Parameters:
+ * 1. Noisy image/volume [REQUIRED]
+ * 2. lambda - regularization parameter [REQUIRED]
+ * 3. Edge-preserving parameter (sigma) [REQUIRED]
+ * 4. Number of iterations, for explicit scheme >= 150 is recommended [OPTIONAL, default 300]
+ * 5. tau - time-marching step for the explicit scheme [OPTIONAL, default 0.015]
+ *
+ * Output:
+ * [1] Regularized image/volume 
+ *
+ * This function is based on the paper by
+ * [1] Hajiaboli, M.R., 2011. An anisotropic fourth-order diffusion filter for image noise removal. International Journal of Computer Vision, 92(2), pp.177-191.
+ */
+
+void mexFunction(
+        int nlhs, mxArray *plhs[],
+        int nrhs, const mxArray *prhs[])
+        
+{
+    int number_of_dims, iter_numb, dimX, dimY, dimZ;
+    const int  *dim_array;
+    float *Input, *Output=NULL, lambda, tau, sigma;
+    
+    dim_array = mxGetDimensions(prhs[0]);
+    number_of_dims = mxGetNumberOfDimensions(prhs[0]);
+    
+    /*Handling Matlab input data*/
+    Input  = (float *) mxGetData(prhs[0]);
+    lambda =  (float) mxGetScalar(prhs[1]); /* regularization parameter */
+    sigma = (float) mxGetScalar(prhs[2]); /* Edge-preserving parameter */
+    iter_numb = 300; /* iterations number */
+    tau = 0.01; /* marching step parameter */
+    
+    if (mxGetClassID(prhs[0]) != mxSINGLE_CLASS) {mexErrMsgTxt("The input image must be in a single precision"); }
+    if ((nrhs < 3) || (nrhs > 5)) mexErrMsgTxt("At least 3 parameters is required, all parameters are: Image(2D/3D), Regularisation parameter, Edge-preserving parameter, iterations number, time-marching constant");
+    if ((nrhs == 4) || (nrhs == 5))  iter_numb = (int) mxGetScalar(prhs[3]); /* iterations number */
+    if (nrhs == 5)  tau =  (float) mxGetScalar(prhs[4]); /* marching step parameter */
+    
+    /*Handling Matlab output data*/
+    dimX = dim_array[0]; dimY = dim_array[1]; dimZ = dim_array[2];
+    
+    /* output arrays*/
+    if (number_of_dims == 2) {
+        dimZ = 1; /*2D case*/
+        /* output image/volume */
+        Output = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL));
+    }
+    if (number_of_dims == 3) Output = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL));
+    
+    Diffus4th_CPU_main(Input, Output, lambda, sigma, iter_numb, tau, dimX, dimY, dimZ);
+}
\ No newline at end of file
diff --git a/Wrappers/Matlab/mex_compile/regularisers_GPU/Diffusion_4thO_GPU.cpp b/Wrappers/Matlab/mex_compile/regularisers_GPU/Diffusion_4thO_GPU.cpp
new file mode 100644
index 0000000..0edc067
--- /dev/null
+++ b/Wrappers/Matlab/mex_compile/regularisers_GPU/Diffusion_4thO_GPU.cpp
@@ -0,0 +1,76 @@
+/*
+ * This work is part of the Core Imaging Library developed by
+ * Visual Analytics and Imaging System Group of the Science Technology
+ * Facilities Council, STFC
+ *
+ * Copyright 2017 Daniil Kazantsev
+ * Copyright 2017 Srikanth Nagella, Edoardo Pasca
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "matrix.h"
+#include "mex.h"
+#include "Diffus_4thO_GPU_core.h"
+
+/* CUDA implementation of fourth-order diffusion scheme [1] for piecewise-smooth recovery (2D/3D case)
+ * The minimisation is performed using explicit scheme. 
+ *
+ * Input Parameters:
+ * 1. Noisy image/volume [REQUIRED]
+ * 2. lambda - regularization parameter [REQUIRED]
+ * 3. Edge-preserving parameter (sigma) [REQUIRED]
+ * 4. Number of iterations, for explicit scheme >= 150 is recommended [OPTIONAL, default 300]
+ * 5. tau - time-marching step for the explicit scheme [OPTIONAL, default 0.015]
+ *
+ * Output:
+ * [1] Regularized image/volume 
+ *
+ * This function is based on the paper by
+ * [1] Hajiaboli, M.R., 2011. An anisotropic fourth-order diffusion filter for image noise removal. International Journal of Computer Vision, 92(2), pp.177-191.
+ */
+
+void mexFunction(
+        int nlhs, mxArray *plhs[],
+        int nrhs, const mxArray *prhs[])
+        
+{
+    int number_of_dims, iter_numb, dimX, dimY, dimZ;
+    const int  *dim_array;
+    float *Input, *Output=NULL, lambda, tau, sigma;
+    
+    dim_array = mxGetDimensions(prhs[0]);
+    number_of_dims = mxGetNumberOfDimensions(prhs[0]);
+    
+    /*Handling Matlab input data*/
+    Input  = (float *) mxGetData(prhs[0]);
+    lambda =  (float) mxGetScalar(prhs[1]); /* regularization parameter */
+    sigma = (float) mxGetScalar(prhs[2]); /* Edge-preserving parameter */
+    iter_numb = 300; /* iterations number */
+    tau = 0.01; /* marching step parameter */
+    
+    if (mxGetClassID(prhs[0]) != mxSINGLE_CLASS) {mexErrMsgTxt("The input image must be in a single precision"); }
+    if ((nrhs < 3) || (nrhs > 5)) mexErrMsgTxt("At least 3 parameters is required, all parameters are: Image(2D/3D), Regularisation parameter, Edge-preserving parameter, iterations number, time-marching constant");
+    if ((nrhs == 4) || (nrhs == 5))  iter_numb = (int) mxGetScalar(prhs[3]); /* iterations number */
+    if (nrhs == 5)  tau =  (float) mxGetScalar(prhs[4]); /* marching step parameter */
+    
+    /*Handling Matlab output data*/
+    dimX = dim_array[0]; dimY = dim_array[1]; dimZ = dim_array[2];
+    
+    /* output arrays*/
+    if (number_of_dims == 2) {
+        dimZ = 1; /*2D case*/
+        /* output image/volume */
+        Output = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL));
+    }
+    if (number_of_dims == 3) Output = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL));
+    
+    Diffus4th_GPU_main(Input, Output, lambda, sigma, iter_numb, tau, dimX, dimY, dimZ);
+}
\ No newline at end of file
diff --git a/Wrappers/Python/ccpi/filters/regularisers.py b/Wrappers/Python/ccpi/filters/regularisers.py
index a07b39a..0b79dac 100644
--- a/Wrappers/Python/ccpi/filters/regularisers.py
+++ b/Wrappers/Python/ccpi/filters/regularisers.py
@@ -2,8 +2,9 @@
 script which assigns a proper device core function based on a flag ('cpu' or 'gpu')
 """
 
-from ccpi.filters.cpu_regularisers import TV_ROF_CPU, TV_FGP_CPU, TV_SB_CPU, dTV_FGP_CPU, TNV_CPU, NDF_CPU, NDF_INPAINT_CPU, NVM_INPAINT_CPU
-from ccpi.filters.gpu_regularisers import TV_ROF_GPU, TV_FGP_GPU, TV_SB_GPU, dTV_FGP_GPU, NDF_GPU
+from ccpi.filters.cpu_regularisers import TV_ROF_CPU, TV_FGP_CPU, TV_SB_CPU, dTV_FGP_CPU, TNV_CPU, NDF_CPU, Diff4th_CPU
+from ccpi.filters.gpu_regularisers import TV_ROF_GPU, TV_FGP_GPU, TV_SB_GPU, dTV_FGP_GPU, NDF_GPU, Diff4th_GPU
+from ccpi.filters.cpu_regularisers import NDF_INPAINT_CPU, NVM_INPAINT_CPU
 
 def ROF_TV(inputData, regularisation_parameter, iterations,
                      time_marching_parameter,device='cpu'):
@@ -110,6 +111,23 @@ def NDF(inputData, regularisation_parameter, edge_parameter, iterations,
     else:
         raise ValueError('Unknown device {0}. Expecting gpu or cpu'\
                          .format(device))
+def DIFF4th(inputData, regularisation_parameter, edge_parameter, iterations,
+                     time_marching_parameter, device='cpu'):
+    if device == 'cpu':
+        return Diff4th_CPU(inputData,
+                     regularisation_parameter,
+                     edge_parameter,
+                     iterations, 
+                     time_marching_parameter)
+    elif device == 'gpu':
+        return Diff4th_GPU(inputData,
+                     regularisation_parameter,
+                     edge_parameter,
+                     iterations, 
+                     time_marching_parameter)
+    else:
+        raise ValueError('Unknown device {0}. Expecting gpu or cpu'\
+                         .format(device))
 def NDF_INP(inputData, maskData, regularisation_parameter, edge_parameter, iterations,
                      time_marching_parameter, penalty_type):
         return NDF_INPAINT_CPU(inputData, maskData, regularisation_parameter, 
diff --git a/Wrappers/Python/demos/demo_cpu_regularisers.py b/Wrappers/Python/demos/demo_cpu_regularisers.py
index 986e3e9..ff500ae 100644
--- a/Wrappers/Python/demos/demo_cpu_regularisers.py
+++ b/Wrappers/Python/demos/demo_cpu_regularisers.py
@@ -12,7 +12,7 @@ import matplotlib.pyplot as plt
 import numpy as np
 import os
 import timeit
-from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, TNV, NDF
+from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, TNV, NDF, DIFF4th
 from qualitymetrics import rmse
 ###############################################################################
 def printParametersToString(pars):
@@ -221,9 +221,9 @@ imgplot = plt.imshow(u0,cmap="gray")
 # set parameters
 pars = {'algorithm' : NDF, \
         'input' : u0,\
-        'regularisation_parameter':0.06, \
-        'edge_parameter':0.04,\
-        'number_of_iterations' :1000 ,\
+        'regularisation_parameter':0.025, \
+        'edge_parameter':0.015,\
+        'number_of_iterations' :500 ,\
         'time_marching_parameter':0.025,\
         'penalty_type':1
         }
@@ -255,11 +255,56 @@ plt.title('{}'.format('CPU results'))
 
 
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_____________FGP-dTV (2D)__________________")
+print ("___Anisotropic Diffusion 4th Order (2D)____")
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
 
 ## plot 
 fig = plt.figure(5)
+plt.suptitle('Performance of DIFF4th regulariser using the CPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(u0,cmap="gray")
+
+# set parameters
+pars = {'algorithm' : DIFF4th, \
+        'input' : u0,\
+        'regularisation_parameter':3.5, \
+        'edge_parameter':0.02,\
+        'number_of_iterations' :500 ,\
+        'time_marching_parameter':0.0015
+        }
+        
+print ("#############DIFF4th CPU################")
+start_time = timeit.default_timer()
+diff4_cpu = DIFF4th(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['edge_parameter'], 
+              pars['number_of_iterations'],
+              pars['time_marching_parameter'],'cpu')
+             
+rms = rmse(Im, diff4_cpu)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(diff4_cpu, cmap="gray")
+plt.title('{}'.format('CPU results'))
+
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_____________FGP-dTV (2D)__________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(6)
 plt.suptitle('Performance of FGP-dTV regulariser using the CPU')
 a=fig.add_subplot(1,2,1)
 a.set_title('Noisy Image')
@@ -311,7 +356,7 @@ print ("__________Total nuclear Variation__________")
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
 
 ## plot 
-fig = plt.figure(6)
+fig = plt.figure(7)
 plt.suptitle('Performance of TNV regulariser using the CPU')
 a=fig.add_subplot(1,2,1)
 a.set_title('Noisy Image')
@@ -355,257 +400,3 @@ a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
          verticalalignment='top', bbox=props)
 imgplot = plt.imshow(tnv_cpu[3,:,:], cmap="gray")
 plt.title('{}'.format('CPU results'))
-
-
-# Uncomment to test 3D regularisation performance 
-#%%
-"""
-slices = 20
-perc = 0.05
-
-noisyVol = np.zeros((slices,N,M),dtype='float32')
-noisyRef = np.zeros((slices,N,M),dtype='float32')
-idealVol = np.zeros((slices,N,M),dtype='float32')
-
-for i in range (slices):
-    noisyVol[i,:,:] = Im + np.random.normal(loc = 0 , scale = perc * Im , size = np.shape(Im))
-    noisyRef[i,:,:] = Im + np.random.normal(loc = 0 , scale = 0.01 * Im , size = np.shape(Im))
-    idealVol[i,:,:] = Im
-
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________ROF-TV (3D)_________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(7)
-plt.suptitle('Performance of ROF-TV regulariser using the CPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy 15th slice of a volume')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm': ROF_TV, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.04,\
-        'number_of_iterations': 500,\
-        'time_marching_parameter': 0.0025        
-        }
-print ("#############ROF TV CPU####################")
-start_time = timeit.default_timer()
-rof_cpu3D = ROF_TV(pars['input'],
-             pars['regularisation_parameter'],
-             pars['number_of_iterations'],
-             pars['time_marching_parameter'],'cpu')
-rms = rmse(idealVol, rof_cpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(rof_cpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the CPU using ROF-TV'))
-
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________FGP-TV (3D)__________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(8)
-plt.suptitle('Performance of FGP-TV regulariser using the CPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy Image')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm' : FGP_TV, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.04, \
-        'number_of_iterations' :300 ,\
-        'tolerance_constant':0.00001,\
-        'methodTV': 0 ,\
-        'nonneg': 0 ,\
-        'printingOut': 0 
-        }
-        
-print ("#############FGP TV CPU####################")
-start_time = timeit.default_timer()
-fgp_cpu3D = FGP_TV(pars['input'], 
-              pars['regularisation_parameter'],
-              pars['number_of_iterations'],
-              pars['tolerance_constant'], 
-              pars['methodTV'],
-              pars['nonneg'],
-              pars['printingOut'],'cpu')  
-             
-             
-rms = rmse(idealVol, fgp_cpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(fgp_cpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the CPU using FGP-TV'))
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________SB-TV (3D)_________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(9)
-plt.suptitle('Performance of SB-TV regulariser using the CPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy Image')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm' : SB_TV, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.04, \
-        'number_of_iterations' :150 ,\
-        'tolerance_constant':0.00001,\
-        'methodTV': 0 ,\
-        'printingOut': 0 
-        }
-        
-print ("#############SB TV CPU####################")
-start_time = timeit.default_timer()
-sb_cpu3D = SB_TV(pars['input'], 
-              pars['regularisation_parameter'],
-              pars['number_of_iterations'],
-              pars['tolerance_constant'], 
-              pars['methodTV'],
-              pars['printingOut'],'cpu')
-             
-rms = rmse(idealVol, sb_cpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(sb_cpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the CPU using SB-TV'))
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("________________NDF (3D)___________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(10)
-plt.suptitle('Performance of NDF regulariser using the CPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy volume')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm' : NDF, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.06, \
-        'edge_parameter':0.04,\
-        'number_of_iterations' :1000 ,\
-        'time_marching_parameter':0.025,\
-        'penalty_type':  1
-        }
-        
-print ("#############NDF CPU################")
-start_time = timeit.default_timer()
-ndf_cpu3D = NDF(pars['input'], 
-              pars['regularisation_parameter'],
-              pars['edge_parameter'], 
-              pars['number_of_iterations'],
-              pars['time_marching_parameter'], 
-              pars['penalty_type'])  
-             
-rms = rmse(idealVol, ndf_cpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(ndf_cpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the CPU using NDF iterations'))
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________FGP-dTV (3D)__________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(11)
-plt.suptitle('Performance of FGP-dTV regulariser using the CPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy Image')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm' : FGP_dTV,\
-        'input' : noisyVol,\
-        'refdata' : noisyRef,\
-        'regularisation_parameter':0.04, \
-        'number_of_iterations' :300 ,\
-        'tolerance_constant':0.00001,\
-        'eta_const':0.2,\
-        'methodTV': 0 ,\
-        'nonneg': 0 ,\
-        'printingOut': 0 
-        }
-        
-print ("#############FGP dTV CPU####################")
-start_time = timeit.default_timer()
-fgp_dTV_cpu3D = FGP_dTV(pars['input'],
-              pars['refdata'], 
-              pars['regularisation_parameter'],
-              pars['number_of_iterations'],
-              pars['tolerance_constant'], 
-              pars['eta_const'],
-              pars['methodTV'],
-              pars['nonneg'],
-              pars['printingOut'],'cpu')
-             
-             
-rms = rmse(idealVol, fgp_dTV_cpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(fgp_dTV_cpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the CPU using FGP-dTV'))
-"""
-#%%
diff --git a/Wrappers/Python/demos/demo_cpu_regularisers3D.py b/Wrappers/Python/demos/demo_cpu_regularisers3D.py
new file mode 100644
index 0000000..8ee157e
--- /dev/null
+++ b/Wrappers/Python/demos/demo_cpu_regularisers3D.py
@@ -0,0 +1,363 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+"""
+Created on Thu Feb 22 11:39:43 2018
+
+Demonstration of 3D CPU regularisers 
+
+@authors: Daniil Kazantsev, Edoardo Pasca
+"""
+
+import matplotlib.pyplot as plt
+import numpy as np
+import os
+import timeit
+from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, NDF, DIFF4th
+from qualitymetrics import rmse
+###############################################################################
+def printParametersToString(pars):
+        txt = r''
+        for key, value in pars.items():
+            if key== 'algorithm' :
+                txt += "{0} = {1}".format(key, value.__name__)
+            elif key == 'input':
+                txt += "{0} = {1}".format(key, np.shape(value))
+            elif key == 'refdata':
+                txt += "{0} = {1}".format(key, np.shape(value))
+            else:
+                txt += "{0} = {1}".format(key, value)
+            txt += '\n'
+        return txt
+###############################################################################
+#%%
+filename = os.path.join(".." , ".." , ".." , "data" ,"lena_gray_512.tif")
+
+# read image
+Im = plt.imread(filename)
+Im = np.asarray(Im, dtype='float32')
+
+Im = Im/255
+perc = 0.05
+u0 = Im + np.random.normal(loc = 0 ,
+                                  scale = perc * Im , 
+                                  size = np.shape(Im))
+u_ref = Im + np.random.normal(loc = 0 ,
+                                  scale = 0.01 * Im , 
+                                  size = np.shape(Im))
+(N,M) = np.shape(u0)
+# map the u0 u0->u0>0
+# f = np.frompyfunc(lambda x: 0 if x < 0 else x, 1,1)
+u0 = u0.astype('float32')
+u_ref = u_ref.astype('float32')
+
+# change dims to check that modules work with non-squared images
+"""
+M = M-100
+u_ref2 = np.zeros([N,M],dtype='float32')
+u_ref2[:,0:M] = u_ref[:,0:M]
+u_ref = u_ref2
+del u_ref2
+
+u02 = np.zeros([N,M],dtype='float32')
+u02[:,0:M] = u0[:,0:M]
+u0 = u02
+del u02
+
+Im2 = np.zeros([N,M],dtype='float32')
+Im2[:,0:M] = Im[:,0:M]
+Im = Im2
+del Im2
+"""
+slices = 20
+
+noisyVol = np.zeros((slices,N,M),dtype='float32')
+noisyRef = np.zeros((slices,N,M),dtype='float32')
+idealVol = np.zeros((slices,N,M),dtype='float32')
+
+for i in range (slices):
+    noisyVol[i,:,:] = Im + np.random.normal(loc = 0 , scale = perc * Im , size = np.shape(Im))
+    noisyRef[i,:,:] = Im + np.random.normal(loc = 0 , scale = 0.01 * Im , size = np.shape(Im))
+    idealVol[i,:,:] = Im
+
+#%%
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________ROF-TV (3D)_________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(1)
+plt.suptitle('Performance of ROF-TV regulariser using the CPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy 15th slice of a volume')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm': ROF_TV, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.04,\
+        'number_of_iterations': 500,\
+        'time_marching_parameter': 0.0025        
+        }
+print ("#############ROF TV CPU####################")
+start_time = timeit.default_timer()
+rof_cpu3D = ROF_TV(pars['input'],
+             pars['regularisation_parameter'],
+             pars['number_of_iterations'],
+             pars['time_marching_parameter'],'cpu')
+rms = rmse(idealVol, rof_cpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(rof_cpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the CPU using ROF-TV'))
+
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________FGP-TV (3D)__________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(2)
+plt.suptitle('Performance of FGP-TV regulariser using the CPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : FGP_TV, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.04, \
+        'number_of_iterations' :300 ,\
+        'tolerance_constant':0.00001,\
+        'methodTV': 0 ,\
+        'nonneg': 0 ,\
+        'printingOut': 0 
+        }
+        
+print ("#############FGP TV CPU####################")
+start_time = timeit.default_timer()
+fgp_cpu3D = FGP_TV(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['number_of_iterations'],
+              pars['tolerance_constant'], 
+              pars['methodTV'],
+              pars['nonneg'],
+              pars['printingOut'],'cpu')  
+             
+             
+rms = rmse(idealVol, fgp_cpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(fgp_cpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the CPU using FGP-TV'))
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________SB-TV (3D)_________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(3)
+plt.suptitle('Performance of SB-TV regulariser using the CPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : SB_TV, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.04, \
+        'number_of_iterations' :150 ,\
+        'tolerance_constant':0.00001,\
+        'methodTV': 0 ,\
+        'printingOut': 0 
+        }
+        
+print ("#############SB TV CPU####################")
+start_time = timeit.default_timer()
+sb_cpu3D = SB_TV(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['number_of_iterations'],
+              pars['tolerance_constant'], 
+              pars['methodTV'],
+              pars['printingOut'],'cpu')
+             
+rms = rmse(idealVol, sb_cpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(sb_cpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the CPU using SB-TV'))
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("________________NDF (3D)___________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(4)
+plt.suptitle('Performance of NDF regulariser using the CPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy volume')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : NDF, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.025, \
+        'edge_parameter':0.015,\
+        'number_of_iterations' :500 ,\
+        'time_marching_parameter':0.025,\
+        'penalty_type':  1
+        }
+        
+print ("#############NDF CPU################")
+start_time = timeit.default_timer()
+ndf_cpu3D = NDF(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['edge_parameter'], 
+              pars['number_of_iterations'],
+              pars['time_marching_parameter'], 
+              pars['penalty_type'])  
+             
+rms = rmse(idealVol, ndf_cpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(ndf_cpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the CPU using NDF iterations'))
+
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("___Anisotropic Diffusion 4th Order (2D)____")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(5)
+plt.suptitle('Performance of Diff4th regulariser using the CPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy volume')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : DIFF4th, \
+        'input' : noisyVol,\
+        'regularisation_parameter':3.5, \
+        'edge_parameter':0.02,\
+        'number_of_iterations' :300 ,\
+        'time_marching_parameter':0.0015
+        }
+        
+print ("#############DIFF4th CPU################")
+start_time = timeit.default_timer()
+diff4th_cpu3D = DIFF4th(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['edge_parameter'], 
+              pars['number_of_iterations'],
+              pars['time_marching_parameter'])  
+             
+rms = rmse(idealVol, diff4th_cpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(diff4th_cpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the CPU using DIFF4th iterations'))
+
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________FGP-dTV (3D)__________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(6)
+plt.suptitle('Performance of FGP-dTV regulariser using the CPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : FGP_dTV,\
+        'input' : noisyVol,\
+        'refdata' : noisyRef,\
+        'regularisation_parameter':0.04, \
+        'number_of_iterations' :300 ,\
+        'tolerance_constant':0.00001,\
+        'eta_const':0.2,\
+        'methodTV': 0 ,\
+        'nonneg': 0 ,\
+        'printingOut': 0 
+        }
+        
+print ("#############FGP dTV CPU####################")
+start_time = timeit.default_timer()
+fgp_dTV_cpu3D = FGP_dTV(pars['input'],
+              pars['refdata'], 
+              pars['regularisation_parameter'],
+              pars['number_of_iterations'],
+              pars['tolerance_constant'], 
+              pars['eta_const'],
+              pars['methodTV'],
+              pars['nonneg'],
+              pars['printingOut'],'cpu')
+             
+             
+rms = rmse(idealVol, fgp_dTV_cpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(fgp_dTV_cpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the CPU using FGP-dTV'))
+#%%
diff --git a/Wrappers/Python/demos/demo_cpu_vs_gpu_regularisers.py b/Wrappers/Python/demos/demo_cpu_vs_gpu_regularisers.py
index 05db23e..4611522 100644
--- a/Wrappers/Python/demos/demo_cpu_vs_gpu_regularisers.py
+++ b/Wrappers/Python/demos/demo_cpu_vs_gpu_regularisers.py
@@ -12,7 +12,7 @@ import matplotlib.pyplot as plt
 import numpy as np
 import os
 import timeit
-from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, NDF
+from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, NDF, DIFF4th
 from qualitymetrics import rmse
 ###############################################################################
 def printParametersToString(pars):
@@ -207,7 +207,7 @@ plt.title('{}'.format('GPU results'))
 
 print ("--------Compare the results--------")
 tolerance = 1e-05
-diff_im = np.zeros(np.shape(rof_cpu))
+diff_im = np.zeros(np.shape(fgp_cpu))
 diff_im = abs(fgp_cpu - fgp_gpu)
 diff_im[diff_im > tolerance] = 1
 a=fig.add_subplot(1,4,4)
@@ -293,7 +293,7 @@ plt.title('{}'.format('GPU results'))
 
 print ("--------Compare the results--------")
 tolerance = 1e-05
-diff_im = np.zeros(np.shape(rof_cpu))
+diff_im = np.zeros(np.shape(sb_cpu))
 diff_im = abs(sb_cpu - sb_gpu)
 diff_im[diff_im > tolerance] = 1
 a=fig.add_subplot(1,4,4)
@@ -379,7 +379,7 @@ plt.title('{}'.format('GPU results'))
 
 print ("--------Compare the results--------")
 tolerance = 1e-05
-diff_im = np.zeros(np.shape(rof_cpu))
+diff_im = np.zeros(np.shape(ndf_cpu))
 diff_im = abs(ndf_cpu - ndf_gpu)
 diff_im[diff_im > tolerance] = 1
 a=fig.add_subplot(1,4,4)
@@ -391,13 +391,93 @@ else:
     print ("Arrays match")
 
 
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("___Anisotropic Diffusion 4th Order (2D)____")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(5)
+plt.suptitle('Comparison of Diff4th regulariser using CPU and GPU implementations')
+a=fig.add_subplot(1,4,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(u0,cmap="gray")
+
+# set parameters
+pars = {'algorithm' : DIFF4th, \
+        'input' : u0,\
+        'regularisation_parameter':3.5, \
+        'edge_parameter':0.02,\
+        'number_of_iterations' :500 ,\
+        'time_marching_parameter':0.001
+        }
+
+print ("#############Diff4th CPU####################")
+start_time = timeit.default_timer()
+diff4th_cpu = DIFF4th(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['edge_parameter'], 
+              pars['number_of_iterations'],
+              pars['time_marching_parameter'],'cpu')
+             
+rms = rmse(Im, diff4th_cpu)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,4,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(diff4th_cpu, cmap="gray")
+plt.title('{}'.format('CPU results'))
+
+print ("##############Diff4th GPU##################")
+start_time = timeit.default_timer()
+diff4th_gpu = DIFF4th(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['edge_parameter'], 
+              pars['number_of_iterations'],
+              pars['time_marching_parameter'], 'gpu')
+             
+rms = rmse(Im, diff4th_gpu)
+pars['rmse'] = rms
+pars['algorithm'] = DIFF4th
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,4,3)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(diff4th_gpu, cmap="gray")
+plt.title('{}'.format('GPU results'))
+
+print ("--------Compare the results--------")
+tolerance = 1e-05
+diff_im = np.zeros(np.shape(diff4th_cpu))
+diff_im = abs(diff4th_cpu - diff4th_gpu)
+diff_im[diff_im > tolerance] = 1
+a=fig.add_subplot(1,4,4)
+imgplot = plt.imshow(diff_im, vmin=0, vmax=1, cmap="gray")
+plt.title('{}'.format('Pixels larger threshold difference'))
+if (diff_im.sum() > 1):
+    print ("Arrays do not match!")
+else:
+    print ("Arrays match")
 
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
 print ("____________FGP-dTV bench___________________")
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
 
 ## plot 
-fig = plt.figure(5)
+fig = plt.figure(6)
 plt.suptitle('Comparison of FGP-dTV regulariser using CPU and GPU implementations')
 a=fig.add_subplot(1,4,1)
 a.set_title('Noisy Image')
@@ -475,7 +555,7 @@ plt.title('{}'.format('GPU results'))
 
 print ("--------Compare the results--------")
 tolerance = 1e-05
-diff_im = np.zeros(np.shape(rof_cpu))
+diff_im = np.zeros(np.shape(fgp_dtv_cpu))
 diff_im = abs(fgp_dtv_cpu - fgp_dtv_gpu)
 diff_im[diff_im > tolerance] = 1
 a=fig.add_subplot(1,4,4)
diff --git a/Wrappers/Python/demos/demo_gpu_regularisers.py b/Wrappers/Python/demos/demo_gpu_regularisers.py
index f3ed50c..3179428 100644
--- a/Wrappers/Python/demos/demo_gpu_regularisers.py
+++ b/Wrappers/Python/demos/demo_gpu_regularisers.py
@@ -12,7 +12,7 @@ import matplotlib.pyplot as plt
 import numpy as np
 import os
 import timeit
-from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, NDF
+from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, NDF, DIFF4th
 from qualitymetrics import rmse
 ###############################################################################
 def printParametersToString(pars):
@@ -219,9 +219,9 @@ imgplot = plt.imshow(u0,cmap="gray")
 # set parameters
 pars = {'algorithm' : NDF, \
         'input' : u0,\
-        'regularisation_parameter':0.06, \
-        'edge_parameter':0.04,\
-        'number_of_iterations' :1000 ,\
+        'regularisation_parameter':0.025, \
+        'edge_parameter':0.015,\
+        'number_of_iterations' :500 ,\
         'time_marching_parameter':0.025,\
         'penalty_type':  1
         }
@@ -253,246 +253,34 @@ plt.title('{}'.format('GPU results'))
 
 
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("____________FGP-dTV bench___________________")
+print ("___Anisotropic Diffusion 4th Order (2D)____")
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
 
 ## plot 
 fig = plt.figure(5)
-plt.suptitle('Performance of the FGP-dTV regulariser using the GPU')
+plt.suptitle('Performance of DIFF4th regulariser using the GPU')
 a=fig.add_subplot(1,2,1)
 a.set_title('Noisy Image')
 imgplot = plt.imshow(u0,cmap="gray")
 
 # set parameters
-pars = {'algorithm' : FGP_dTV, \
+pars = {'algorithm' : DIFF4th, \
         'input' : u0,\
-        'refdata' : u_ref,\
-        'regularisation_parameter':0.04, \
-        'number_of_iterations' :2000 ,\
-        'tolerance_constant':1e-06,\
-        'eta_const':0.2,\
-        'methodTV': 0 ,\
-        'nonneg': 0 ,\
-        'printingOut': 0 
-        }
-
-print ("##############FGP dTV GPU##################")
-start_time = timeit.default_timer()
-fgp_dtv_gpu = FGP_dTV(pars['input'], 
-              pars['refdata'], 
-              pars['regularisation_parameter'],
-              pars['number_of_iterations'],
-              pars['tolerance_constant'], 
-              pars['eta_const'], 
-              pars['methodTV'],
-              pars['nonneg'],
-              pars['printingOut'],'gpu')
-                                   
-rms = rmse(Im, fgp_dtv_gpu)
-pars['rmse'] = rms
-pars['algorithm'] = FGP_dTV
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(fgp_dtv_gpu, cmap="gray")
-plt.title('{}'.format('GPU results'))
-
-
-# Uncomment to test 3D regularisation performance 
-#%%
-"""
-N = 512
-slices = 20
-
-filename = os.path.join(".." , ".." , ".." , "data" ,"lena_gray_512.tif")
-Im = plt.imread(filename)
-Im = np.asarray(Im, dtype='float32')
-
-Im = Im/255
-perc = 0.05
-
-noisyVol = np.zeros((slices,N,N),dtype='float32')
-noisyRef = np.zeros((slices,N,N),dtype='float32')
-idealVol = np.zeros((slices,N,N),dtype='float32')
-
-for i in range (slices):
-    noisyVol[i,:,:] = Im + np.random.normal(loc = 0 , scale = perc * Im , size = np.shape(Im))
-    noisyRef[i,:,:] = Im + np.random.normal(loc = 0 , scale = 0.01 * Im , size = np.shape(Im))
-    idealVol[i,:,:] = Im
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________ROF-TV (3D)_________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(6)
-plt.suptitle('Performance of ROF-TV regulariser using the GPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy 15th slice of a volume')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm': ROF_TV, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.04,\
-        'number_of_iterations': 500,\
-        'time_marching_parameter': 0.0025        
+        'regularisation_parameter':3.5, \
+        'edge_parameter':0.02,\
+        'number_of_iterations' :500 ,\
+        'time_marching_parameter':0.0015
         }
-print ("#############ROF TV GPU####################")
+        
+print ("#############DIFF4th CPU################")
 start_time = timeit.default_timer()
-rof_gpu3D = ROF_TV(pars['input'],
-             pars['regularisation_parameter'],
-             pars['number_of_iterations'],
-             pars['time_marching_parameter'],'gpu')
-rms = rmse(idealVol, rof_gpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(rof_gpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the GPU using ROF-TV'))
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________FGP-TV (3D)__________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(7)
-plt.suptitle('Performance of FGP-TV regulariser using the GPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy Image')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm' : FGP_TV, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.04, \
-        'number_of_iterations' :300 ,\
-        'tolerance_constant':0.00001,\
-        'methodTV': 0 ,\
-        'nonneg': 0 ,\
-        'printingOut': 0 
-        }
-
-print ("#############FGP TV GPU####################")
-start_time = timeit.default_timer()
-fgp_gpu3D = FGP_TV(pars['input'], 
-              pars['regularisation_parameter'],
-              pars['number_of_iterations'],
-              pars['tolerance_constant'], 
-              pars['methodTV'],
-              pars['nonneg'],
-              pars['printingOut'],'gpu')
-
-rms = rmse(idealVol, fgp_gpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(fgp_gpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the GPU using FGP-TV'))
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________SB-TV (3D)__________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(8)
-plt.suptitle('Performance of SB-TV regulariser using the GPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy Image')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm' : SB_TV, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.04, \
-        'number_of_iterations' :100 ,\
-        'tolerance_constant':1e-05,\
-        'methodTV': 0 ,\
-        'printingOut': 0 
-        }
-
-print ("#############SB TV GPU####################")
-start_time = timeit.default_timer()
-sb_gpu3D = SB_TV(pars['input'], 
-              pars['regularisation_parameter'],
-              pars['number_of_iterations'],
-              pars['tolerance_constant'], 
-              pars['methodTV'],
-              pars['printingOut'],'gpu')
-
-rms = rmse(idealVol, sb_gpu3D)
-pars['rmse'] = rms
-
-txtstr = printParametersToString(pars)
-txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
-print (txtstr)
-a=fig.add_subplot(1,2,2)
-
-# these are matplotlib.patch.Patch properties
-props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
-# place a text box in upper left in axes coords
-a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
-         verticalalignment='top', bbox=props)
-imgplot = plt.imshow(sb_gpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the GPU using SB-TV'))
-
-
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________NDF-TV (3D)_________________")
-print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-
-## plot 
-fig = plt.figure(9)
-plt.suptitle('Performance of NDF regulariser using the GPU')
-a=fig.add_subplot(1,2,1)
-a.set_title('Noisy Image')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
-
-# set parameters
-pars = {'algorithm' : NDF, \
-        'input' : noisyVol,\
-        'regularisation_parameter':0.06, \
-        'edge_parameter':0.04,\
-        'number_of_iterations' :1000 ,\
-        'time_marching_parameter':0.025,\
-        'penalty_type':  1
-        }
-
-print ("#############NDF GPU####################")
-start_time = timeit.default_timer()
-ndf_gpu3D = NDF(pars['input'], 
+diff4_gpu = DIFF4th(pars['input'], 
               pars['regularisation_parameter'],
               pars['edge_parameter'], 
               pars['number_of_iterations'],
-              pars['time_marching_parameter'], 
-              pars['penalty_type'],'gpu')
-
-rms = rmse(idealVol, ndf_gpu3D)
+              pars['time_marching_parameter'],'gpu')
+             
+rms = rmse(Im, diff4_gpu)
 pars['rmse'] = rms
 
 txtstr = printParametersToString(pars)
@@ -505,49 +293,48 @@ props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
 # place a text box in upper left in axes coords
 a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
          verticalalignment='top', bbox=props)
-imgplot = plt.imshow(ndf_gpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the GPU using NDF'))
-
+imgplot = plt.imshow(diff4_gpu, cmap="gray")
+plt.title('{}'.format('GPU results'))
 
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
-print ("_______________FGP-dTV (3D)________________")
+print ("____________FGP-dTV bench___________________")
 print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
 
 ## plot 
-fig = plt.figure(10)
-plt.suptitle('Performance of FGP-dTV regulariser using the GPU')
+fig = plt.figure(6)
+plt.suptitle('Performance of the FGP-dTV regulariser using the GPU')
 a=fig.add_subplot(1,2,1)
 a.set_title('Noisy Image')
-imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+imgplot = plt.imshow(u0,cmap="gray")
 
 # set parameters
 pars = {'algorithm' : FGP_dTV, \
-        'input' : noisyVol,\
-        'refdata' : noisyRef,\
+        'input' : u0,\
+        'refdata' : u_ref,\
         'regularisation_parameter':0.04, \
-        'number_of_iterations' :300 ,\
-        'tolerance_constant':0.00001,\
+        'number_of_iterations' :2000 ,\
+        'tolerance_constant':1e-06,\
         'eta_const':0.2,\
         'methodTV': 0 ,\
         'nonneg': 0 ,\
         'printingOut': 0 
         }
 
-print ("#############FGP TV GPU####################")
+print ("##############FGP dTV GPU##################")
 start_time = timeit.default_timer()
-fgp_dTV_gpu3D = FGP_dTV(pars['input'],
+fgp_dtv_gpu = FGP_dTV(pars['input'], 
               pars['refdata'], 
               pars['regularisation_parameter'],
               pars['number_of_iterations'],
               pars['tolerance_constant'], 
-              pars['eta_const'],
+              pars['eta_const'], 
               pars['methodTV'],
               pars['nonneg'],
               pars['printingOut'],'gpu')
-
-rms = rmse(idealVol, fgp_dTV_gpu3D)
+                                   
+rms = rmse(Im, fgp_dtv_gpu)
 pars['rmse'] = rms
-
+pars['algorithm'] = FGP_dTV
 txtstr = printParametersToString(pars)
 txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
 print (txtstr)
@@ -558,7 +345,5 @@ props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
 # place a text box in upper left in axes coords
 a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
          verticalalignment='top', bbox=props)
-imgplot = plt.imshow(fgp_dTV_gpu3D[10,:,:], cmap="gray")
-plt.title('{}'.format('Recovered volume on the GPU using FGP-dTV'))
-"""
-#%%
+imgplot = plt.imshow(fgp_dtv_gpu, cmap="gray")
+plt.title('{}'.format('GPU results'))
diff --git a/Wrappers/Python/demos/demo_gpu_regularisers3D.py b/Wrappers/Python/demos/demo_gpu_regularisers3D.py
new file mode 100644
index 0000000..13c4e7b
--- /dev/null
+++ b/Wrappers/Python/demos/demo_gpu_regularisers3D.py
@@ -0,0 +1,367 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+"""
+Created on Thu Feb 22 11:39:43 2018
+
+Demonstration of GPU regularisers
+
+@authors: Daniil Kazantsev, Edoardo Pasca
+"""
+
+import matplotlib.pyplot as plt
+import numpy as np
+import os
+import timeit
+from ccpi.filters.regularisers import ROF_TV, FGP_TV, SB_TV, FGP_dTV, NDF, DIFF4th
+from qualitymetrics import rmse
+###############################################################################
+def printParametersToString(pars):
+        txt = r''
+        for key, value in pars.items():
+            if key== 'algorithm' :
+                txt += "{0} = {1}".format(key, value.__name__)
+            elif key == 'input':
+                txt += "{0} = {1}".format(key, np.shape(value))
+            elif key == 'refdata':
+                txt += "{0} = {1}".format(key, np.shape(value))
+            else:
+                txt += "{0} = {1}".format(key, value)
+            txt += '\n'
+        return txt
+###############################################################################
+#%%
+filename = os.path.join(".." , ".." , ".." , "data" ,"lena_gray_512.tif")
+
+# read image
+Im = plt.imread(filename)                     
+Im = np.asarray(Im, dtype='float32')
+
+Im = Im/255
+perc = 0.05
+u0 = Im + np.random.normal(loc = 0 ,
+                                  scale = perc * Im , 
+                                  size = np.shape(Im))
+u_ref = Im + np.random.normal(loc = 0 ,
+                                  scale = 0.01 * Im , 
+                                  size = np.shape(Im))
+(N,M) = np.shape(u0)
+# map the u0 u0->u0>0
+# f = np.frompyfunc(lambda x: 0 if x < 0 else x, 1,1)
+u0 = u0.astype('float32')
+u_ref = u_ref.astype('float32')
+"""
+M = M-100
+u_ref2 = np.zeros([N,M],dtype='float32')
+u_ref2[:,0:M] = u_ref[:,0:M]
+u_ref = u_ref2
+del u_ref2
+
+u02 = np.zeros([N,M],dtype='float32')
+u02[:,0:M] = u0[:,0:M]
+u0 = u02
+del u02
+
+Im2 = np.zeros([N,M],dtype='float32')
+Im2[:,0:M] = Im[:,0:M]
+Im = Im2
+del Im2
+"""
+
+#%%
+slices = 20
+
+filename = os.path.join(".." , ".." , ".." , "data" ,"lena_gray_512.tif")
+Im = plt.imread(filename)
+Im = np.asarray(Im, dtype='float32')
+
+Im = Im/255
+perc = 0.05
+
+noisyVol = np.zeros((slices,N,N),dtype='float32')
+noisyRef = np.zeros((slices,N,N),dtype='float32')
+idealVol = np.zeros((slices,N,N),dtype='float32')
+
+for i in range (slices):
+    noisyVol[i,:,:] = Im + np.random.normal(loc = 0 , scale = perc * Im , size = np.shape(Im))
+    noisyRef[i,:,:] = Im + np.random.normal(loc = 0 , scale = 0.01 * Im , size = np.shape(Im))
+    idealVol[i,:,:] = Im
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________ROF-TV (3D)_________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(1)
+plt.suptitle('Performance of ROF-TV regulariser using the GPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy 15th slice of a volume')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm': ROF_TV, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.04,\
+        'number_of_iterations': 500,\
+        'time_marching_parameter': 0.0025        
+        }
+print ("#############ROF TV GPU####################")
+start_time = timeit.default_timer()
+rof_gpu3D = ROF_TV(pars['input'],
+             pars['regularisation_parameter'],
+             pars['number_of_iterations'],
+             pars['time_marching_parameter'],'gpu')
+rms = rmse(idealVol, rof_gpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(rof_gpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the GPU using ROF-TV'))
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________FGP-TV (3D)__________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(2)
+plt.suptitle('Performance of FGP-TV regulariser using the GPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : FGP_TV, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.04, \
+        'number_of_iterations' :300 ,\
+        'tolerance_constant':0.00001,\
+        'methodTV': 0 ,\
+        'nonneg': 0 ,\
+        'printingOut': 0 
+        }
+
+print ("#############FGP TV GPU####################")
+start_time = timeit.default_timer()
+fgp_gpu3D = FGP_TV(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['number_of_iterations'],
+              pars['tolerance_constant'], 
+              pars['methodTV'],
+              pars['nonneg'],
+              pars['printingOut'],'gpu')
+
+rms = rmse(idealVol, fgp_gpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(fgp_gpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the GPU using FGP-TV'))
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________SB-TV (3D)__________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(3)
+plt.suptitle('Performance of SB-TV regulariser using the GPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : SB_TV, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.04, \
+        'number_of_iterations' :100 ,\
+        'tolerance_constant':1e-05,\
+        'methodTV': 0 ,\
+        'printingOut': 0 
+        }
+
+print ("#############SB TV GPU####################")
+start_time = timeit.default_timer()
+sb_gpu3D = SB_TV(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['number_of_iterations'],
+              pars['tolerance_constant'], 
+              pars['methodTV'],
+              pars['printingOut'],'gpu')
+
+rms = rmse(idealVol, sb_gpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(sb_gpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the GPU using SB-TV'))
+
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________NDF-TV (3D)_________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(4)
+plt.suptitle('Performance of NDF regulariser using the GPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : NDF, \
+        'input' : noisyVol,\
+        'regularisation_parameter':0.025, \
+        'edge_parameter':0.015,\
+        'number_of_iterations' :500 ,\
+        'time_marching_parameter':0.025,\
+        'penalty_type':  1
+        }
+
+print ("#############NDF GPU####################")
+start_time = timeit.default_timer()
+ndf_gpu3D = NDF(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['edge_parameter'], 
+              pars['number_of_iterations'],
+              pars['time_marching_parameter'], 
+              pars['penalty_type'],'gpu')
+
+rms = rmse(idealVol, ndf_gpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(ndf_gpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the GPU using NDF'))
+
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("___Anisotropic Diffusion 4th Order (3D)____")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(5)
+plt.suptitle('Performance of DIFF4th regulariser using the GPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : DIFF4th, \
+        'input' : noisyVol,\
+        'regularisation_parameter':3.5, \
+        'edge_parameter':0.02,\
+        'number_of_iterations' :300 ,\
+        'time_marching_parameter':0.0015
+        }
+        
+print ("#############DIFF4th CPU################")
+start_time = timeit.default_timer()
+diff4_gpu3D = DIFF4th(pars['input'], 
+              pars['regularisation_parameter'],
+              pars['edge_parameter'], 
+              pars['number_of_iterations'],
+              pars['time_marching_parameter'],'gpu')
+             
+rms = rmse(idealVol, diff4_gpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(diff4_gpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('GPU results'))
+
+
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+print ("_______________FGP-dTV (3D)________________")
+print ("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%")
+
+## plot 
+fig = plt.figure(6)
+plt.suptitle('Performance of FGP-dTV regulariser using the GPU')
+a=fig.add_subplot(1,2,1)
+a.set_title('Noisy Image')
+imgplot = plt.imshow(noisyVol[10,:,:],cmap="gray")
+
+# set parameters
+pars = {'algorithm' : FGP_dTV, \
+        'input' : noisyVol,\
+        'refdata' : noisyRef,\
+        'regularisation_parameter':0.04, \
+        'number_of_iterations' :300 ,\
+        'tolerance_constant':0.00001,\
+        'eta_const':0.2,\
+        'methodTV': 0 ,\
+        'nonneg': 0 ,\
+        'printingOut': 0 
+        }
+
+print ("#############FGP TV GPU####################")
+start_time = timeit.default_timer()
+fgp_dTV_gpu3D = FGP_dTV(pars['input'],
+              pars['refdata'], 
+              pars['regularisation_parameter'],
+              pars['number_of_iterations'],
+              pars['tolerance_constant'], 
+              pars['eta_const'],
+              pars['methodTV'],
+              pars['nonneg'],
+              pars['printingOut'],'gpu')
+
+rms = rmse(idealVol, fgp_dTV_gpu3D)
+pars['rmse'] = rms
+
+txtstr = printParametersToString(pars)
+txtstr += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time)
+print (txtstr)
+a=fig.add_subplot(1,2,2)
+
+# these are matplotlib.patch.Patch properties
+props = dict(boxstyle='round', facecolor='wheat', alpha=0.75)
+# place a text box in upper left in axes coords
+a.text(0.15, 0.25, txtstr, transform=a.transAxes, fontsize=14,
+         verticalalignment='top', bbox=props)
+imgplot = plt.imshow(fgp_dTV_gpu3D[10,:,:], cmap="gray")
+plt.title('{}'.format('Recovered volume on the GPU using FGP-dTV'))
+#%%
diff --git a/Wrappers/Python/setup-regularisers.py.in b/Wrappers/Python/setup-regularisers.py.in
index f55c6fe..76dfecf 100644
--- a/Wrappers/Python/setup-regularisers.py.in
+++ b/Wrappers/Python/setup-regularisers.py.in
@@ -40,6 +40,7 @@ extra_include_dirs += [os.path.join(".." , ".." , "Core"),
                        os.path.join(".." , ".." , "Core",  "regularisers_GPU" , "TV_SB" ) ,
                        os.path.join(".." , ".." , "Core",  "regularisers_GPU" , "NDF" ) ,
                        os.path.join(".." , ".." , "Core",  "regularisers_GPU" , "dTV_FGP" ) , 
+                       os.path.join(".." , ".." , "Core",  "regularisers_GPU" , "DIFF4th" ) , 
 						   "."]
 
 if platform.system() == 'Windows':				   
diff --git a/Wrappers/Python/src/cpu_regularisers.pyx b/Wrappers/Python/src/cpu_regularisers.pyx
index c934f1d..549b046 100644
--- a/Wrappers/Python/src/cpu_regularisers.pyx
+++ b/Wrappers/Python/src/cpu_regularisers.pyx
@@ -22,6 +22,7 @@ cdef extern float TV_ROF_CPU_main(float *Input, float *Output, float lambdaPar,
 cdef extern float TV_FGP_CPU_main(float *Input, float *Output, float lambdaPar, int iterationsNumb, float epsil, int methodTV, int nonneg, int printM, int dimX, int dimY, int dimZ);
 cdef extern float SB_TV_CPU_main(float *Input, float *Output, float lambdaPar, int iterationsNumb, float epsil, int methodTV, int printM, int dimX, int dimY, int dimZ);
 cdef extern float Diffusion_CPU_main(float *Input, float *Output, float lambdaPar, float sigmaPar, int iterationsNumb, float tau, int penaltytype, int dimX, int dimY, int dimZ);
+cdef extern float Diffus4th_CPU_main(float *Input, float *Output, float lambdaPar, float sigmaPar, int iterationsNumb, float tau, int dimX, int dimY, int dimZ);
 cdef extern float TNV_CPU_main(float *Input, float *u, float lambdaPar, int maxIter, float tol, int dimX, int dimY, int dimZ);
 cdef extern float dTV_FGP_CPU_main(float *Input, float *InputRef, float *Output, float lambdaPar, int iterationsNumb, float epsil, float eta, int methodTV, int nonneg, int printM, int dimX, int dimY, int dimZ);
 
@@ -322,6 +323,48 @@ def NDF_3D(np.ndarray[np.float32_t, ndim=3, mode="c"] inputData,
 
     return outputData
 
+#****************************************************************#
+#*************Anisotropic Fourth-Order diffusion*****************#
+#****************************************************************#
+def Diff4th_CPU(inputData, regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter):
+    if inputData.ndim == 2:
+        return Diff4th_2D(inputData, regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter)
+    elif inputData.ndim == 3:
+        return Diff4th_3D(inputData, regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter)
+
+def Diff4th_2D(np.ndarray[np.float32_t, ndim=2, mode="c"] inputData, 
+                     float regularisation_parameter,
+                     float edge_parameter,
+                     int iterationsNumb,                     
+                     float time_marching_parameter):
+    cdef long dims[2]
+    dims[0] = inputData.shape[0]
+    dims[1] = inputData.shape[1]
+    
+    cdef np.ndarray[np.float32_t, ndim=2, mode="c"] outputData = \
+            np.zeros([dims[0],dims[1]], dtype='float32')   
+    
+    # Run Anisotropic Fourth-Order diffusion for 2D data 
+    Diffus4th_CPU_main(&inputData[0,0], &outputData[0,0], regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter, dims[1], dims[0], 1)
+    return outputData
+          
+def Diff4th_3D(np.ndarray[np.float32_t, ndim=3, mode="c"] inputData, 
+                     float regularisation_parameter,
+                     float edge_parameter,
+                     int iterationsNumb,
+                     float time_marching_parameter):
+    cdef long dims[3]
+    dims[0] = inputData.shape[0]
+    dims[1] = inputData.shape[1]
+    dims[2] = inputData.shape[2]
+    
+    cdef np.ndarray[np.float32_t, ndim=3, mode="c"] outputData = \
+            np.zeros([dims[0],dims[1],dims[2]], dtype='float32')
+    
+    # Run Anisotropic Fourth-Order diffusion for  3D data 
+    Diffus4th_CPU_main(&inputData[0,0,0], &outputData[0,0,0], regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter, dims[2], dims[1], dims[0])
+
+    return outputData
 #*********************Inpainting WITH****************************#
 #***************Nonlinear (Isotropic) Diffusion******************#
 #****************************************************************#
diff --git a/Wrappers/Python/src/gpu_regularisers.pyx b/Wrappers/Python/src/gpu_regularisers.pyx
index 7eab5d5..b67e62b 100644
--- a/Wrappers/Python/src/gpu_regularisers.pyx
+++ b/Wrappers/Python/src/gpu_regularisers.pyx
@@ -23,6 +23,7 @@ cdef extern void TV_FGP_GPU_main(float *Input, float *Output, float lambdaPar, i
 cdef extern void TV_SB_GPU_main(float *Input, float *Output, float lambdaPar, int iter, float epsil, int methodTV, int printM, int N, int M, int Z);
 cdef extern void NonlDiff_GPU_main(float *Input, float *Output, float lambdaPar, float sigmaPar, int iterationsNumb, float tau, int penaltytype, int N, int M, int Z);
 cdef extern void dTV_FGP_GPU_main(float *Input, float *InputRef, float *Output, float lambdaPar, int iterationsNumb, float epsil, float eta, int methodTV, int nonneg, int printM, int N, int M, int Z);
+cdef extern void Diffus4th_GPU_main(float *Input, float *Output, float lambdaPar, float sigmaPar, int iterationsNumb, float tau, int N, int M, int Z);
 
 # Total-variation Rudin-Osher-Fatemi (ROF)
 def TV_ROF_GPU(inputData,
@@ -135,7 +136,26 @@ def NDF_GPU(inputData,
                      edge_parameter,
                      iterations, 
                      time_marching_parameter,
-                     penalty_type)                     
+                     penalty_type)
+# Anisotropic Fourth-Order diffusion
+def Diff4th_GPU(inputData,
+                     regularisation_parameter,
+                     edge_parameter,
+                     iterations, 
+                     time_marching_parameter):
+    if inputData.ndim == 2:
+        return Diff4th_2D(inputData,
+                     regularisation_parameter,
+                     edge_parameter,
+                     iterations, 
+                     time_marching_parameter)
+    elif inputData.ndim == 3:
+        return Diff4th_3D(inputData,
+                     regularisation_parameter,
+                     edge_parameter,
+                     iterations, 
+                     time_marching_parameter)
+                     
 #****************************************************************#
 #********************** Total-variation ROF *********************#
 #****************************************************************#
@@ -403,3 +423,41 @@ def NDF_GPU_3D(np.ndarray[np.float32_t, ndim=3, mode="c"] inputData,
     NonlDiff_GPU_main(&inputData[0,0,0], &outputData[0,0,0], regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter, penalty_type, dims[2], dims[1], dims[0])
 
     return outputData
+#****************************************************************#
+#************Anisotropic Fourth-Order diffusion******************#
+#****************************************************************#
+def Diff4th_2D(np.ndarray[np.float32_t, ndim=2, mode="c"] inputData, 
+                     float regularisation_parameter,
+                     float edge_parameter,
+                     int iterationsNumb,
+                     float time_marching_parameter):
+    cdef long dims[2]
+    dims[0] = inputData.shape[0]
+    dims[1] = inputData.shape[1]
+    
+    cdef np.ndarray[np.float32_t, ndim=2, mode="c"] outputData = \
+            np.zeros([dims[0],dims[1]], dtype='float32')
+    
+    # Run Anisotropic Fourth-Order diffusion for 2D data 
+    # Running CUDA code here  
+    Diffus4th_GPU_main(&inputData[0,0], &outputData[0,0], regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter, dims[1], dims[0], 1)
+    return outputData
+            
+def Diff4th_3D(np.ndarray[np.float32_t, ndim=3, mode="c"] inputData, 
+                     float regularisation_parameter,
+                     float edge_parameter,
+                     int iterationsNumb,
+                     float time_marching_parameter):
+    cdef long dims[3]
+    dims[0] = inputData.shape[0]
+    dims[1] = inputData.shape[1]
+    dims[2] = inputData.shape[2]
+    
+    cdef np.ndarray[np.float32_t, ndim=3, mode="c"] outputData = \
+            np.zeros([dims[0],dims[1],dims[2]], dtype='float32')    
+       
+    # Run Anisotropic Fourth-Order diffusion for  3D data 
+    # Running CUDA code here  
+    Diffus4th_GPU_main(&inputData[0,0,0], &outputData[0,0,0], regularisation_parameter, edge_parameter, iterationsNumb, time_marching_parameter, dims[2], dims[1], dims[0])
+
+    return outputData