diff options
Diffstat (limited to 'tests')
36 files changed, 6 insertions, 2352 deletions
diff --git a/tests/ipecamera/autotrigger.sh b/tests/autotrigger.sh index 5f8b4db..b7318c8 100755 --- a/tests/ipecamera/autotrigger.sh +++ b/tests/autotrigger.sh @@ -1,8 +1,9 @@ #! /bin/bash function pci { - PCILIB_PATH="../../" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* + PCILIB_PATH=`which pci` + #LD_LIBRARY_PATH="$PCILIB_PATH" + $PCILIB_PATH/pci $* } echo "Starting the grabber" diff --git a/tests/ipecamera/debug/incomplete.sh b/tests/debug/incomplete.sh index 5c80198..090e638 100755 --- a/tests/ipecamera/debug/incomplete.sh +++ b/tests/debug/incomplete.sh @@ -1,8 +1,9 @@ #! /bin/bash function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* + PCILIB_PATH=`which pci` + #LD_LIBRARY_PATH="$PCILIB_PATH" + $PCILIB_PATH/pci $* } rm -f images.raw diff --git a/tests/dma/debug/test-iommu.sh b/tests/dma/debug/test-iommu.sh deleted file mode 100755 index 74e3ece..0000000 --- a/tests/dma/debug/test-iommu.sh +++ /dev/null @@ -1,19 +0,0 @@ -#! /bin/bash - -i=1 -while [ 1 ]; do - pci --start-dma dma1r - for name in /sys/class/fpga/fpga0/kbuf*; do - bus_addr=0x`cat $name | grep "bus addr" | cut -d ':' -f 2 | sed -e 's/\s\+//g'` - if [ $((bus_addr % 4096)) -ne 0 ]; then - - echo "Failed at iteration $i, $name" - echo "----------------------" - cat $name - exit - fi - - done - pci --stop-dma dma1r - i=$((i + 1)) -done diff --git a/tests/dma/ipe/bench.sh b/tests/dma/ipe/bench.sh deleted file mode 100755 index aa7ec25..0000000 --- a/tests/dma/ipe/bench.sh +++ /dev/null @@ -1,40 +0,0 @@ -#!/bin/bash - -size=65536 - -function pci { - PCILIB_PATH=`pwd`/../../.. - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci -m kapture $* -} - - -rm -f bench.out - -echo "Stopping DMA and skipping exiting data..." -pci --stop-dma dma0r -echo "Starting DMA..." -pci --start-dma dma0r -echo "Enabling data generation..." -pci -w 0x4 0x1 - -# Clean DMA buffers -#while [ $? -eq 0 ]; do -# pci -r dma0 -s 65536 &> /dev/null -#done - -echo "Reading the data from DMA..." -for i in `seq 1 100`; do - pci -r dma0 --multipacket -s $size -o bench.out - if [ $? -ne 0 ]; then - echo "Stopping DMA due to the error..." - pci --stop-dma dma0r - exit - fi -done - -echo "Stopping DMA..." -pci --stop-dma dma0r - -../../../apps/check_counter bench.out - -#pci -r 0 -s 32 diff --git a/tests/dma/nwl/bench.sh b/tests/dma/nwl/bench.sh deleted file mode 100755 index b36c251..0000000 --- a/tests/dma/nwl/bench.sh +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/bash - -function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -size=16 -bytes=`expr $size "*" 4` - -pci -w xrawdata_packet_length $bytes -pci -w xrawdata_enable_loopback 0 -pci -w xrawdata_enable_generator 0 - -pci --start-dma dma1 - -while [ $? -eq 0 ]; do - pci -r dma1 -s 65536 &> /dev/null -done - -pci -w xrawdata_enable_loopback 1 - -for i in `seq 1 10`; do - pci -w dma1 -s $size "*$i" - pci -r dma1 -s $size -o bench.out -done - -pci --stop-dma dma1 - -pci -w xrawdata_enable_loopback 0 diff --git a/tests/dma/nwl/cleanup.sh b/tests/dma/nwl/cleanup.sh deleted file mode 100755 index 5ef568e..0000000 --- a/tests/dma/nwl/cleanup.sh +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/bash - -function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -pci --start-dma dma1r -pci -w dma1r_reset_request 1 -pci -w dma1r_reset 1 -pci -r dma1r_running - -pci --free-kernel-memory dma diff --git a/tests/dma/xilinx/xilinx_dma.sh b/tests/dma/xilinx/xilinx_dma.sh deleted file mode 100755 index 6aada8b..0000000 --- a/tests/dma/xilinx/xilinx_dma.sh +++ /dev/null @@ -1,121 +0,0 @@ -#! /bin/bash - -BAR=0 -USE=1 -ITERATIONS=2 -BUFFERS=16 - -function pci { - PCILIB_PATH=`pwd`/.. - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - - -function reset { - pci -b $BAR -w 0 1 - usleep 1000 - pci -b $BAR -w 0 0 - pci -b $BAR -w 4 0 -} - -function read_cfg { -# echo $1 1>&2 - pci -a config -r 0x$1 | awk '{ print $2; }' -} - -function parse_config { - info=0x`pci -b $BAR -r 0 | awk '{ print $2; }'` - model=`printf "%X" $((info>>24))` - if [ $model -eq 14 ]; then - model="Xilinx Virtex-6" - else - model="Xilinx $model" - fi - version=$(((info >> 8) & 0xFF)) - data_width=$((16 * (2 ** ((info >> 16) & 0xF)))) - - echo "$model, build $version, $data_width bits" - - - next=`read_cfg 34 | cut -c 7-8` - - while [ $next -ne 0 ]; do - cap=`read_cfg $next` - capid=`echo $cap | cut -c 7-8` - if [ $capid -eq 10 ]; then - addr=`printf "%X" $((0x$next + 12))` - pcie_link1=`read_cfg $addr` - addr=`printf "%X" $((0x$next + 16))` - pcie_link2=`read_cfg $addr` - - link_speed=$((((0x$pcie_link2 & 0xF0000) >> 16))) - link_width=$((((0x$pcie_link2 & 0x3F00000) >> 20))) - - dev_link_speed=$((((0x$pcie_link1 & 0xF)))) - dev_link_width=$((((0x$pcie_link1 & 0x3F0) >> 4))) - fi - next=`echo $cap | cut -c 5-6` - done - - echo "Link: PCIe gen$link_speed x$link_width" - if [ $link_speed -ne $dev_link_speed -o $link_width -ne $dev_link_width ]; then - echo " * But device capable of gen$dev_link_speed x$dev_link_width" - fi - - info=0x`read_cfg 40` - max_tlp=$((2 ** (5 + ((info & 0xE0) >> 5)))) - echo "TLP: 32 dwords (transfering 32 TLP per request)" - if [ $max_tlp -ne 32 ]; then - echo " * But device is able to transfer TLP up to $max_tlp bytes" - fi - - # 2500 MT/s, but PCIe gen1 and gen2 uses 10 bit encoding - speed=$((link_width * link_speed * 2500 / 10)) -} - -reset -parse_config - -pci --enable-irq -pci --acknowledge-irq - -pci --free-kernel-memory $USE -pci --alloc-kernel-memory $USE --type c2s -s $BUFFERS -bus=`pci --list-kernel-memory 00100001 | awk '{ print $4; }' | grep 00` -#ptr=`pci --list-kernel-memory 00100001 | awk '{ print $2; }' | grep 00` - -# TLP size -pci -b $BAR -w 0x0C 0x20 -# TLP count -pci -b $BAR -w 0x10 0x20 -# Data -pci -b $BAR -w 0x14 0x13131313 - -dmaperf=0 -for i in `seq 1 $ITERATIONS`; do - for addr in $bus; do - pci -b $BAR -w 0x08 0x$addr - -#Trigger - pci -b $BAR -w 0x04 0x01 - pci --wait-irq -# pci -b $BAR -w 0x04 0x00 - - status=`pci -b $BAR -r 0x04 | awk '{print $2; }' | cut -c 5-8` - if [ $status != "0101" ]; then - echo "Read failed, invalid status: $status" - fi - - dmaperf=$((dmaperf + 0x`pci -b $BAR -r 0x28 | awk '{print $2}'`)) - reset - done -done - -pci --free-kernel-memory $USE -pci --disable-irq - -echo -# Don't ask me about this formula -echo "Performance reported by FPGA: $((4096 * BUFFERS * ITERATIONS * $speed / $dmaperf / 8)) MB/s" - -#pci -b $BAR -r 0 -s 32 diff --git a/tests/dma/xilinx/xilinx_dma_static_mem.sh b/tests/dma/xilinx/xilinx_dma_static_mem.sh deleted file mode 100755 index e3ba0f5..0000000 --- a/tests/dma/xilinx/xilinx_dma_static_mem.sh +++ /dev/null @@ -1,117 +0,0 @@ -#! /bin/bash - -BAR=0 -USE=1 -ITERATIONS=1 -TLP_SIZE=32 -BUFFER_SIZE=8 - -function pci { - PCILIB_PATH=`pwd`/.. - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - - -function reset { - pci -b $BAR -w 0 1 - usleep 1000 - pci -b $BAR -w 0 0 - pci -b $BAR -w 4 0 -} - -function read_cfg { -# echo $1 1>&2 - pci -a config -r 0x$1 | awk '{ print $2; }' -} - -function parse_config { - info=0x`pci -b $BAR -r 0 | awk '{ print $2; }'` - model=`printf "%X" $((info>>24))` - if [ $model -eq 14 ]; then - model="Xilinx Virtex-6" - else - model="Xilinx $model" - fi - version=$(((info >> 8) & 0xFF)) - data_width=$((16 * (2 ** ((info >> 16) & 0xF)))) - - echo "$model, build $version, $data_width bits" - - - next=`read_cfg 34 | cut -c 7-8` - - while [ $next -ne 0 ]; do - cap=`read_cfg $next` - capid=`echo $cap | cut -c 7-8` - if [ $capid -eq 10 ]; then - addr=`printf "%X" $((0x$next + 12))` - pcie_link1=`read_cfg $addr` - addr=`printf "%X" $((0x$next + 16))` - pcie_link2=`read_cfg $addr` - - link_speed=$((((0x$pcie_link2 & 0xF0000) >> 16))) - link_width=$((((0x$pcie_link2 & 0x3F00000) >> 20))) - - dev_link_speed=$((((0x$pcie_link1 & 0xF)))) - dev_link_width=$((((0x$pcie_link1 & 0x3F0) >> 4))) - fi - next=`echo $cap | cut -c 5-6` - done - - echo "Link: PCIe gen$link_speed x$link_width" - if [ $link_speed -ne $dev_link_speed -o $link_width -ne $dev_link_width ]; then - echo " * But device capable of gen$dev_link_speed x$dev_link_width" - fi - - info=0x`read_cfg 40` - max_tlp=$((2 ** (5 + ((info & 0xE0) >> 5)))) - echo "TLP: 32 dwords (transfering 32 TLP per request)" - if [ $max_tlp -ne $TLP_SIZE ]; then - echo " * But device is able to transfer TLP up to $max_tlp bytes" - fi - - # 2500 MT/s, but PCIe gen1 and gen2 uses 10 bit encoding - speed=$((link_width * link_speed * 2500 / 10)) -} - -reset -parse_config - -pci --enable-irq -pci --acknowledge-irq - -# TLP size -pci -b $BAR -w 0x0C 0x`echo "obase=16; $TLP_SIZE" | bc` -# TLP count -pci -b $BAR -w 0x10 0x`echo "obase=16; $BUFFER_SIZE * 1024 * 1024 / $TLP_SIZE / 4" | bc` -# Data -pci -b $BAR -w 0x14 0x13131313 - -bus="80000000" -dmaperf=0 -for i in `seq 1 $ITERATIONS`; do - for addr in $bus; do - pci -b $BAR -w 0x08 0x$addr - -#Trigger - pci -b $BAR -w 0x04 0x01 - pci --wait-irq - - status=`pci -b $BAR -r 0x04 | awk '{print $2; }' | cut -c 5-8` - if [ $status != "0101" ]; then - echo "Read failed, invalid status: $status" - fi - - dmaperf=$((dmaperf + 0x`pci -b $BAR -r 0x28 | awk '{print $2}'`)) - reset - done -done - -pci --free-kernel-memory $USE -pci --disable-irq - -echo -# Don't ask me about this formula -echo "Performance reported by FPGA: $(($BUFFER_SIZE * 1024 * 1024 * ITERATIONS * $speed / $dmaperf / 8)) MB/s" - -#pci -b $BAR -r 0 -s 32 diff --git a/tests/dump_file.sh b/tests/dump_file.sh deleted file mode 100755 index 6773a19..0000000 --- a/tests/dump_file.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/bash - -hexdump -e ' "0x%08.8_ax: " 4/4 " 0x%08x " "\n" ' $1 | less diff --git a/tests/grab.sh b/tests/grab.sh deleted file mode 100755 index daf142e..0000000 --- a/tests/grab.sh +++ /dev/null @@ -1,24 +0,0 @@ -#! /bin/bash - -function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -rm -f images.raw - - -echo "Starting the grabber" -pci -g -o images.raw --run-time 3000000 & -pid=$! - -usleep 1000000 - -for i in `seq 1 1000`; do - echo "Trigger $i" - pci --trigger - usleep 100000 -done - -echo "Waiting grabber to finish" -wait $pid diff --git a/tests/heb/DataTaking.sh b/tests/heb/DataTaking.sh deleted file mode 100755 index b6046d7..0000000 --- a/tests/heb/DataTaking.sh +++ /dev/null @@ -1,96 +0,0 @@ -#!/bin/bash - -#Channel 1 --> 05 -#Channel 2 --> 0B -#Channel 1&2 --> 0F -#Channel 3 --> 13 -#Channel 4 --> 23 -#Channel 3&4 --> 33 -#ALL --> 3F - -#rm *.out -pci -r dma1 --multipacket -o /dev/null - -echo "Start DMA ..... " -#pci --start-dma dma1 -sleep 0.2 - -echo "Data Reset ... " -pci -w 0x9040 000003f1 -sleep 0.1 -pci -w 0x9040 000003f0 - -sleep 0.1 -#echo "Pilot bunch emulator ..... " -#pci -w 0x9040 400003f0 -sleep 0.2 -pci -w 0x9040 03f0 -#pci -r 0x9000 -s 40 -#sleep 0.2 -echo "Start data pci. ..... " -pci -w 0x9040 00bf0 - -sleep 2 - -echo "Stop data acquis...... " -pci -w 0x9040 003f0 -pci -r 0x9000 -s 40 -sleep 0.1 -echo "Enable data transfer.... " -pci -w 0x9040 007f0 -exit -sleep 2 -pci -r dma1 -o run_num_$1.out --multipacket -sleep 2 - -pci -w 0x9040 003f0 -#echo "Status ... " - - - -pci -r 0x9000 -s 40 - - status=`pci -r 0x9050 -s 1 | awk '{print $2$3$4}'` - if [ "$status" != "85000021" ]; then - echo "--------------------------------->>>> ERROR! ... " - error=1 - exit - else - echo " Status 1 -> OK " - fi - - status=`pci -r 0x9000 -s 1 | awk '{print $2$3$4}'` - if [ "$status" != "01000021" ]; then - echo "--------------------------------->>>> ERROR! ... " - error=1 - exit - else - echo " Status 1 Readout -> OK " - fi - -status=`pci -r 0x9008 -s 1 | awk '{print $2$3$4}'` - if [ "$status" != "01000021" ]; then - echo "--------------------------------->>>> ERROR! ... " - error=1 - exit - else - echo " Status 2 Readout -> OK " - fi - -status=`pci -r 0x9010 -s 1 | awk '{print $2$3$4}'` - if [ "$status" != "01000021" ]; then - echo "--------------------------------->>>> ERROR! ... " - error=1 - exit - else - echo " Status 3 Readout -> OK " - fi - -status=`pci -r 0x9018 -s 1 | awk '{print $2$3$4}'` - if [ "$status" != "01000021" ]; then - echo "--------------------------------->>>> ERROR! ... " - error=1 - exit - else - echo " Status 4 Readout -> OK " - fi diff --git a/tests/heb/cfg/BoardOFF.sh b/tests/heb/cfg/BoardOFF.sh deleted file mode 100755 index 351bcb8..0000000 --- a/tests/heb/cfg/BoardOFF.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - - -echo " ************************************************************** " -echo " Board OFF" -echo " ************************************************************** " - -pci -w 0x9040 0x01 -sleep 0.5 - -pci --stop-dma dma1 diff --git a/tests/heb/cfg/BoardOn.sh b/tests/heb/cfg/BoardOn.sh deleted file mode 100755 index b14c73b..0000000 --- a/tests/heb/cfg/BoardOn.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/bash - -echo " ************************************************************** " -echo " Start DMA" -echo " ************************************************************** " - -pci --start-dma dma1 -sleep 0.5 -pci --list-dma-engines - - -echo " ************************************************************** " -echo " Board ON procedure" -echo " ************************************************************** " - -pci -w 0x9040 0x01 -sleep 1 - -echo "switch ON the power supply --> FIRST <--" -echo "Press a key to continue ...." -read -n 1 -s - -echo "Switch ON T/Hs" -pci -w 0x9040 0x3C1 -pci -r 0x9040 -s1 - -echo "switch ON the power supply --> SECOND <--" -echo "Press a key to continue ...." -read -n 1 -s - -echo "Switch ON ADCs" -pci -w 0x9040 0x3F1 -pci -r 0x9040 -s1 -sleep 0.1 - - -pci -w 0x9040 0x3F0 -pci -r 0x9040 -s1 -sleep 1 - -echo " Status ................... " -pci -r 0x9000 -s 40 - - - -./PLL_conf_calib_3001.sh - -echo " Status ................... " -pci -r 0x9000 -s 40 - - -echo " ************************************************************** " -echo " Board Ready" -echo " ************************************************************** " - - -echo " --> remember to run: ./Set_Default.sh" diff --git a/tests/heb/cfg/README b/tests/heb/cfg/README deleted file mode 100644 index 125bc0d..0000000 --- a/tests/heb/cfg/README +++ /dev/null @@ -1,11 +0,0 @@ - - Initializing - ./BoardOn.sh - ./Set_Default.sh - - - Configuring the size - pci -w 9020 0x20 (linear scale) - - * Number of samples are determined by 0x9020 / 0x9028 (0x0e by default) - * For each sample is descibed by (184 / 2) * 128 bits - * Where most-significant bytes of 4 dwords (128 bit) are iterating - from 0x00 to 0xb8 with step 0x02 diff --git a/tests/heb/cfg/Set_ADC_1_Delay.sh b/tests/heb/cfg/Set_ADC_1_Delay.sh deleted file mode 100755 index bd8f980..0000000 --- a/tests/heb/cfg/Set_ADC_1_Delay.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/bash - -echo "Set CH_4 clock ADC 1 delay... " - -upfix=000501 -fixed=4 - - hex_val=$(printf "%01x\n" $1) - echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`." - pci -w 0x9060 $upfix$hex_val$fixed diff --git a/tests/heb/cfg/Set_ADC_2_Delay.sh b/tests/heb/cfg/Set_ADC_2_Delay.sh deleted file mode 100755 index d6cdf75..0000000 --- a/tests/heb/cfg/Set_ADC_2_Delay.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/bash - -echo "Set CH_5 clock ADC 2 delay... " - -upfix=000501 -fixed=5 - - hex_val=$(printf "%01x\n" $1) - echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`." - pci -w 0x9060 $upfix$hex_val$fixed diff --git a/tests/heb/cfg/Set_ADC_3_Delay.sh b/tests/heb/cfg/Set_ADC_3_Delay.sh deleted file mode 100755 index 567b977..0000000 --- a/tests/heb/cfg/Set_ADC_3_Delay.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/bash - -echo "Set CH_6 clock ADC 3 delay... " - -upfix=000501 -fixed=6 - - hex_val=$(printf "%01x\n" $1) - echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`." - pci -w 0x9060 $upfix$hex_val$fixed diff --git a/tests/heb/cfg/Set_ADC_4_Delay.sh b/tests/heb/cfg/Set_ADC_4_Delay.sh deleted file mode 100755 index d666595..0000000 --- a/tests/heb/cfg/Set_ADC_4_Delay.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -echo "Set CH_7 clock ADC 4 delay... " - -upfix=000501 -fixed=7 - - hex_val=$(printf "%01x\n" $1) - echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`." - pci -w 0x9060 $upfix$hex_val$fixed - diff --git a/tests/heb/cfg/Set_Default.sh b/tests/heb/cfg/Set_Default.sh deleted file mode 100755 index 0149bf0..0000000 --- a/tests/heb/cfg/Set_Default.sh +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/bash - -echo "Set Defaults delay value in the board... " - -./Set_FPGA_clock_delay.sh 0 -sleep 0.1 - - ./Set_Delay_chip.sh 16 16 16 16 -sleep 0.1 - -./Set_TH_Delay.sh 12 -sleep 0.1 - -./Set_ADC_1_Delay.sh 5 -sleep 0.1 - -./Set_ADC_2_Delay.sh 5 -sleep 0.1 - -./Set_ADC_3_Delay.sh 5 -sleep 0.1 - -./Set_ADC_4_Delay.sh 5 - -#pci -w 0x9020 200b20 -pci -w 0x9020 20 -pci -w 0x9028 e - -echo " DONE ................ " - diff --git a/tests/heb/cfg/Set_Delay_chip.sh b/tests/heb/cfg/Set_Delay_chip.sh deleted file mode 100755 index 3d15cad..0000000 --- a/tests/heb/cfg/Set_Delay_chip.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - - zero=0 - hex_val1=$(printf "%02x\n" $1) - hex_val2=$(printf "%02x\n" $2) - hex_val3=$(printf "%02x\n" $3) - hex_val4=$(printf "%02x\n" $4) - - pci -w 0x9080 $zero$hex_val4$hex_val3$hex_val2$hex_val1 - pci -r 0x9080 -s 1 - sleep 0.5 diff --git a/tests/heb/cfg/Set_FPGA_clock_delay.sh b/tests/heb/cfg/Set_FPGA_clock_delay.sh deleted file mode 100755 index f4d0f46..0000000 --- a/tests/heb/cfg/Set_FPGA_clock_delay.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/bash - -echo "Set delay on T/Hs signals... " - -upfix=000501 -fixed=0 - - hex_val=$(printf "%01x\n" $1) - echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`." - pci -w 0x9060 $upfix$hex_val$fixed diff --git a/tests/heb/cfg/Set_TH_Delay.sh b/tests/heb/cfg/Set_TH_Delay.sh deleted file mode 100755 index 9a6e58f..0000000 --- a/tests/heb/cfg/Set_TH_Delay.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/bash - -echo "Set delay on T/Hs signals... " - -upfix=000501 -fixed=3 - - hex_val=$(printf "%01x\n" $1) - echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`." - pci -w 0x9060 $upfix$hex_val$fixed diff --git a/tests/heb/debug/debug.sh b/tests/heb/debug/debug.sh deleted file mode 100755 index 2db21d4..0000000 --- a/tests/heb/debug/debug.sh +++ /dev/null @@ -1,45 +0,0 @@ -#! /bin/bash - -SCRIPT_PATH="`dirname \"$0\"`" -SCRIPT_PATH="`( cd \"$TESTS_PATH\" && pwd )`" -PCILIB_PATH=${SCRIPT_PATH%/tests/*} - -function pci { - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -function strip_bad_values { - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/heb_strip_bad_values $* -} - -function request_data { - $PCILIB_PATH/tests/heb/debug/request_data.sh $* -} - -while [ 1 ]; do - from=`pci --list-dma-engines | grep C2S | sed -s 's/\s\+/ /g' | cut -d ' ' -f 6` - to=`pci --list-dma-engines | grep C2S | sed -s 's/\s\+/ /g' | cut -d ' ' -f 8` - - if [ $from -gt $to ]; then - buffers="`seq $from 255` `seq 0 $to`" - else - buffers=`seq $from $to` - fi - - echo $buffers - - rm data.out - for i in $buffers; do - pci --read-dma-buffer dma1r:$i -o data.out - done - - - error=`strip_bad_values data.out | head -n 1 | cut -f 1 -d ':'` - if [ $error != "0x1140" ]; then - echo "Problems found" - exit - else - echo "Fine" - request_data - fi -done diff --git a/tests/heb/debug/request_data.sh b/tests/heb/debug/request_data.sh deleted file mode 100755 index b751f5d..0000000 --- a/tests/heb/debug/request_data.sh +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/bash - -pci -r dma1 --multipacket -o /dev/null - -#echo "Data Reset ... " -pci -w 0x9040 000003f1 -sleep 0.1 -pci -w 0x9040 000003f0 - -sleep 0.1 -#echo "Pilot bunch emulator ..... " -#pci -w 0x9040 400003f0 -sleep 0.2 -pci -w 0x9040 03f0 -#pci -r 0x9000 -s 40 -#sleep 0.2 -#echo "Start data pci. ..... " -pci -w 0x9040 00bf0 - -sleep 2 - -#echo "Stop data acquis...... " -pci -w 0x9040 003f0 -pci -r 0x9000 -s 40 -sleep 0.1 -#echo "Enable data transfer.... " -pci -w 0x9040 007f0 diff --git a/tests/ipecamera/bench.sh b/tests/ipecamera/bench.sh deleted file mode 100755 index 09edae9..0000000 --- a/tests/ipecamera/bench.sh +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/bash - -function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -size=16 -bytes=`expr $size "*" 4` - -rm -f bench.out -pci --stop-dma dma1 -pci --reset - -#pci -w xrawdata_packet_length $bytes - -pci --start-dma dma1 -pci -w control 0x1e5 -sleep 1 -pci -w control 0x1e1 - -sleep 1 -pci -w control 0x3e1 -for i in `seq 1 10`; do -# pci -w control 0x1e1 - pci -w dma1 -s $size "*$i" -# pci -w control 0x3e1 - usleep 100000 - pci -r dma1 -s $size -o bench.out -done - -pci -w control 0x1e1 -pci --stop-dma dma1 - diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh deleted file mode 100755 index f4afa06..0000000 --- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh +++ /dev/null @@ -1,326 +0,0 @@ -#!/bin/bash - -###################### by Michele Caselle and Uros Stafanovic ################################################## -############ Resent procedure and camera initialization for 10 -bit mode ###################################### - -error=0 -echo " Reset Readout and CMOSIS " -pci -w 0x9040 80000204 -sleep .1 -#echo " Release Reset for Readout" -#pci -w 0x9040 800001e0 -sleep .1 -##################### PLL SET ##################################### -val=f501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -echo " Start CMOSIS Configuration .." -pci -w 0x9000 f301 -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "bf301" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=d207 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -# Michele 10 - 12 bit mode # -# ################################################################################################### -echo " 10 - bit mode, set Bit_mode " -val=ef00 ###################################################### -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# Michele set ADC_resolution @ 12 bits -echo " 10 bit mode, set ADC resolution 10 bits " -val=f000 # qui for 10 - 11 - 12 bits ######################################################## -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -# adc recommended 28=44 -val=e72c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val " - error=1 - # exit -fi -sleep 0.01 -# #################################################################################################### - -################# CAMERA CONFIGURATION ############################################ -val=e603 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -val=d404 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=d501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# recommended is d840 -val=d840 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -# sleep 0.01 -# recommended is db40 -val=db40 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=de65 -# val=de0 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -sleep 0.01 -val=df6a -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -echo " End CMOSIS Configuration .." -######################################################################################################## -echo " Write exp time......" - -######################################### EXP TIME ####################################################### -val=aa25 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# val=ab2c -val=ab00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# val=acaa -val=ac00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -#################################################################################################################### - -sleep 0.01 -#pci -w 0x9040 80000201 -sleep 0.01 -########################## WRITE THE READOUT NUMBER OF LINE ####################################################### -pci -w cmosis_number_lines 1088 -#pci -w number_lines 8 -sleep 0.01 -################################################################################################################# -pci --start-dma dma1 -sleep 0.01 -#VRAMP 6c is 108 -val=e26c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -#VRAMP 6c is 108 -val=e36c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -###################################### NUMBER OF OUTPUT ############################################################ -##pci -w 0x9000 0xc803 -sleep 0.01 -val=c800 -pci -w 0x9000 $val -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -#pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd011 -sleep 0.01 -#pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd111 -######################################################################################################### -sleep 0.01 - - - -################################################## -#SET the max number of frame in DDR -pci -w 0x91a0 0x71 - -#echo " Reset Readout and CMOSIS " -pci -w 0x9040 0x80000204 -sleep .1 -echo " Release Reset for Readout" -pci -w 0x9040 0x80000201 -sleep .1 - -status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'` -if [ "$status" != "8449ffff0f0010013ffff111" ]; then - echo "--------------------------------->>>> ERROR! in the camera status ... " - echo " $status " - error=1 - # exit -fi - -#echo "--> $status" - -if [ "$error" = "1" ]; then - echo " Error in the reset and initialization" -else - echo " Camera READY ........................... OK" -fi -echo - -echo "DMA reset ... " -pci --stop-dma dma1 -sleep 0.5 -pci --start-dma dma1 - - diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh deleted file mode 100755 index 5a4e582..0000000 --- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh +++ /dev/null @@ -1,325 +0,0 @@ -#!/bin/bash - -###################### by Michele Caselle and Uros Stafanovic ################################################## -############ Resent procedure and camera initialization for 10 -bit mode ###################################### - -error=0 -echo " Reset Readout and CMOSIS " -pci -w 0x9040 80000204 -sleep .1 -#echo " Release Reset for Readout" -#pci -w 0x9040 800001e0 -sleep .1 -##################### PLL SET ##################################### -val=f501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -echo " Start CMOSIS Configuration .." -pci -w 0x9000 f301 -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "bf301" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=d207 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -# Michele 10 - 12 bit mode # -# ################################################################################################### -echo " 10 - bit mode, set Bit_mode " -val=ef00 ###################################################### -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# Michele set ADC_resolution @ 12 bits -echo " 10 bit mode, set ADC resolution 10 bits " -val=f000 # qui for 10 - 11 - 12 bits ######################################################## -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -# adc recommended 28=44 -val=e72c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val " - error=1 - # exit -fi -sleep 0.01 -# #################################################################################################### - -################# CAMERA CONFIGURATION ############################################ -val=e603 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -val=d404 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=d501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# recommended is d840 -val=d840 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -# sleep 0.01 -# recommended is db40 -val=db40 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=de65 -# val=de0 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -sleep 0.01 -val=df6a -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -echo " End CMOSIS Configuration .." -######################################################################################################## -echo " Write exp time......" - -######################################### EXP TIME ####################################################### -val=aa25 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# val=ab2c -val=ab00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# val=acaa -val=ac00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -#################################################################################################################### - -sleep 0.01 -#pci -w 0x9040 80000201 -sleep 0.01 -########################## WRITE THE READOUT NUMBER OF LINE ####################################################### -pci -w cmosis_number_lines 2047 -#pci -w number_lines 8 -sleep 0.01 -################################################################################################################# -pci --start-dma dma1 -sleep 0.01 -#VRAMP 6c is 108 -val=e26c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -#VRAMP 6c is 108 -val=e36c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -###################################### NUMBER OF OUTPUT ############################################################ -##pci -w 0x9000 0xc803 -sleep 0.01 -val=c800 -pci -w 0x9000 $val -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -#pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd011 -sleep 0.01 -#pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd111 -######################################################################################################### -sleep 0.01 - - - -################################################## -#SET the max number of frame in DDR -pci -w 0x91a0 0x71 - -#echo " Reset Readout and CMOSIS " -pci -w 0x9040 0x80000204 -sleep .1 -echo " Release Reset for Readout" -pci -w 0x9040 0x80000201 -sleep .1 - -status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'` -if [ "$status" != "8449ffff0f0010013ffff111" ]; then - echo "--------------------------------->>>> ERROR! in the camera status ... " - error=1 - # exit -fi - -#echo "--> $status" - -if [ "$error" = "1" ]; then - echo " Error in the reset and initialization" -else - echo " Camera READY ........................... OK" -fi -echo - -echo "DMA reset ... " -pci --stop-dma dma1 -sleep 0.5 -pci --start-dma dma1 - - diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh deleted file mode 100755 index 3c4af0e..0000000 --- a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh +++ /dev/null @@ -1,318 +0,0 @@ -#!/bin/bash - -###################### by Michele Caselle and Uros Stafanovic ################################################## -############ Resent procedure and camera initialization for 12 -bit mode ###################################### - -error=0 -echo " Reset Readout and CMOSIS " -pci -w 0x9040 1e4 -sleep .1 -echo " Release Reset for Readout" -pci -w 0x9040 1e0 -sleep .1 -##################### PLL SET ##################################### -val=f501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -echo " Start CMOSIS Configuration .." -pci -w 0x9000 f301 -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "bf301" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -val=d207 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 - -# Michele 10 - 12 bit mode # -# ################################################################################################### -echo " 11 - bit mode, set Bit_mode " -val=ef00 ###################################################### -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# Michele set ADC_resolution @ 12 bits -echo " 11 bit mode, set ADC resolution 11 bits " -val=f001 # qui for 10 - 11 - 12 bits ######################################################## -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 - -# adc recommended 28=44 -val=e72c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val " - error =1 - # exit -fi -sleep 0.01 -# #################################################################################################### - -################# CAMERA CONFIGURATION ############################################ -val=e603 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 - -val=d404 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -val=d501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# recommended is d840 -val=d840 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -# sleep 0.01 -# recommended is db40 -val=db40 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -val=de65 -# val=de0 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -sleep 0.01 -val=df6a -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -echo " End CMOSIS Configuration .." -######################################################################################################## -echo " Write exp time......" - -######################################### EXP TIME ####################################################### -val=aa25 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# val=ab2c -val=ab02 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# val=acaa -val=ac00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -#################################################################################################################### - -sleep 0.01 -pci -w 0x9040 201 -sleep 0.01 -########################## WRITE THE READOUT NUMBER OF LINE ####################################################### -pci -w cmosis_number_lines 1088 -#pci -w number_lines 8 -sleep 0.01 -################################################################################################################# -pci --start-dma dma1 -sleep 0.01 -#VRAMP 6c is 108 -val=e26c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -#VRAMP 6c is 108 -val=e36c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -######################################################################################################## -#pci -w 0x9000 0xc802 -##pci -w 0x9000 0xc803 -sleep 0.01 -val=c802 -pci -w 0x9000 $val -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -#pci -r 0x9000 -s 10 - -################################################## -#SET the max number of frame in DDR -pci -w 0x91a0 0x1C - -sleep 0.01 -#pci -w 0x9000 0xd011 -sleep 0.01 -#pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd111 -#pci -r 0x9000 -s 10 -######################################################################################################### -sleep 0.01 - -status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'` -if [ "$status" != "8449ffff0f0010013ffff111" ]; then - echo "--------------------------------->>>> ERROR! in the camera status ... " - error =1 - # exit -fi - -#echo "--> $status" - -if [ "$error" = "1" ]; then - echo " Error in the resetand initialization" -else - echo " Camera READY ........ OK" -fi -echo - - -echo "DMA reset ... " -pci --stop-dma dma1 -sleep 0.5 -pci --start-dma dma1 - diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh deleted file mode 100755 index b04f2cd..0000000 --- a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh +++ /dev/null @@ -1,323 +0,0 @@ -#!/bin/bash - -###################### by Michele Caselle and Uros Stafanovic ################################################## -############ Resent procedure and camera initialization for 12 -bit mode ###################################### - -error=0 -echo " Reset Readout and CMOSIS " -pci -w 0x9040 1e4 -sleep .1 -echo " Release Reset for Readout" -pci -w 0x9040 1e0 -sleep .1 -##################### PLL SET ##################################### -val=f501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -echo " Start CMOSIS Configuration .." -pci -w 0x9000 f301 -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "bf301" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -val=d207 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 - -# Michele 10 - 12 bit mode # -# ################################################################################################### -echo " 12 - bit mode, set Bit_mode " -val=ef00 ###################################################### -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# Michele set ADC_resolution @ 12 bits -echo " 12 bit mode, set ADC resolution 12 bits " -val=f002 # qui for 10 - 11 - 12 bits ######################################################## -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 - -# adc recommended 28=44 -val=e72c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val " - error =1 - # exit -fi -sleep 0.01 -# #################################################################################################### - -################# CAMERA CONFIGURATION ############################################ -val=e603 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 - -val=d404 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -val=d501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# recommended is d840 -val=d840 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -# sleep 0.01 -# recommended is db40 -val=db40 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -val=de65 -# val=de0 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -sleep 0.01 -val=df6a -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -echo " End CMOSIS Configuration .." -######################################################################################################## -echo " Write exp time......" - -######################################### EXP TIME ####################################################### -val=aa0f -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# val=ab2c -val=ab00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -# val=acaa -val=ac00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -#################################################################################################################### - -sleep 0.01 -pci -w 0x9040 201 -sleep 0.01 -########################## WRITE THE READOUT NUMBER OF LINE ####################################################### -pci -w cmosis_number_lines 1088 -#pci -w number_lines 8 -sleep 0.01 -################################################################################################################# -pci --start-dma dma1 -sleep 0.01 -#VRAMP 6c is 108 -val=e26c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -#VRAMP 6c is 108 -val=e36c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -sleep 0.01 -######################################################################################################## -#pci -w 0x9000 0xc802 -##pci -w 0x9000 0xc803 -sleep 0.01 -val=c802 -pci -w 0x9000 $val -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error =1 - # exit -fi -#pci -r 0x9000 -s 10 - -sleep 0.01 - -################################################## -#SET the max number of frame in DDR -pci -w 0x91a0 0x1C - - -#pci -w 0x9000 0xd011 -sleep 0.01 -pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd111 -sleep 0.01 -pci -r 0x9000 -s 10 -######################################################################################################### -sleep 0.1 - -status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'` -if [ "$status" != "844950280f0010013ffff111" ]; then - - echo "--------------------------------->>>> ERROR! in the camera status ... " - echo $status - error=1 - # exit -fi - -#echo "--> $status" - -if [ "$error" = "1" ]; then - echo " Error in the resetand initialization" -else - echo " Camera READY ........ OK" -fi -echo - - - -echo "DMA reset ... " -pci --stop-dma dma1 -sleep 0.5 -pci --start-dma dma1 diff --git a/tests/ipecamera/frame.sh b/tests/ipecamera/frame.sh deleted file mode 100755 index 679817b..0000000 --- a/tests/ipecamera/frame.sh +++ /dev/null @@ -1,36 +0,0 @@ -#!/bin/bash - -TESTS_PATH="`dirname \"$0\"`" -TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`" - -function pci { - PCILIB_PATH=$TESTS_PATH/.. - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -pci --stop-dma dma1 -#pci --reset - -echo "Set packet size 1024 .. " -pci -w cmosis_number_lines 1088 -#pci -w xrawdata_packet_length 4096 -pci --start-dma dma1 -usleep 1000 - -echo "Send frame request ... " -pci -w control 1e9 -usleep 100000 -pci -w control 1e1 -usleep 100000 - -echo "Enable Readout ... " -pci -w control 3e1 - -usleep 100000 - -pci -r dma1 -o bench.out --multipacket - -pci -w control 1e1 - -pci --stop-dma dma1 - diff --git a/tests/ipecamera/frame_req.sh b/tests/ipecamera/frame_req.sh deleted file mode 100755 index bce89c3..0000000 --- a/tests/ipecamera/frame_req.sh +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/bash - -function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -#pci --stop-dma dma1 -#pci --reset - -echo "Set packet size 1024 .. " -pci -w cmosis_number_lines 1088 -#pci -w xrawdata_packet_length 4096 -pci --start-dma dma1 -usleep 1000 - -echo "Send frame request ... " -pci -w control 1e9 -usleep 100000 -pci -w control 1e1 -usleep 100000 - -echo "Enable Readout 3... " -pci -w control 3e1 -usleep 1000000 -pci -w control 1e1 - diff --git a/tests/ipecamera/grab-hwtrigger.sh b/tests/ipecamera/grab-hwtrigger.sh deleted file mode 100755 index 0279ab4..0000000 --- a/tests/ipecamera/grab-hwtrigger.sh +++ /dev/null @@ -1,20 +0,0 @@ -#! /bin/bash - -function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -function enable_hw_trigger { - usleep 100000 - pci -w control 0xa01 -} - -rm -f images.raw - -enable_hw_trigger & -pid=$! - -echo "Starting the grabber" -pci -g -o images.raw --run-time 60000000 --verbose 10 -o /dev/null -wait $pid diff --git a/tests/ipecamera/stimuli.sh b/tests/ipecamera/stimuli.sh deleted file mode 100755 index 33e99e1..0000000 --- a/tests/ipecamera/stimuli.sh +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/bash - -function pci { - PCILIB_PATH="/root/pcitool" - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -rm -f bench.out - -echo "Set FFFF the frame space .." -pci -w 0x9180 fff - -echo "Set the number of frames .." -pci -w reg9170 55 - -pci --start-dma dma1 - -echo "Send frame request ... " -pci -w control 1f1 -usleep 100000 -pci -w control 1e1 - - -echo "Enable Readout ... " -pci -w control 3e1 -pci -r dma1 -o bench.out --multipacket -pci -w control 1e1 - -pci --stop-dma dma1 - diff --git a/tests/ipecamera/tests/loopback-test.sh b/tests/ipecamera/tests/loopback-test.sh deleted file mode 100755 index 1c033cc..0000000 --- a/tests/ipecamera/tests/loopback-test.sh +++ /dev/null @@ -1,87 +0,0 @@ -#! /bin/bash - -TESTS_PATH="`dirname \"$0\"`" -TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`" - -function pci { - PCILIB_PATH=$TESTS_PATH/.. - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -function compare { - PCILIB_PATH=$TESTS_PATH/.. - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/compare_to_value $* -} - -#size=`expr 1024 "*" 1024` -size=`expr 1024 "*" 1` -multiplier=2 -wait=0 - -/root/pcitool/tests/ipecamera/frame.sh &> /dev/null -rm -f bench.out - -pci --stop-dma dma1 -pci --start-dma dma1 - -pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null - -pci -r dma1 -s 1024 -o /dev/null | grep -i "Error (62)" &> /dev/null -if [ $? -ne 0 ]; then - echo "There is data on dma..." - exit -fi - -failed=0 -send=0 -errors=0 -err_num=0 - -print_iters=`expr 2 + 1024 '*' 100 / $size` - -read_size=`expr $multiplier '*' $size` -echo "Starting..." -i=1 - -pci -w 0x9040 0x201 - -while [ 1 ]; do - if [ $wait -gt 0 ]; then - pci -w 0x9040 0x1 - fi - - pci -w dma1 -s $size "*0x$i" - rm -f /tmp/camera-test.out - pci -r dma1 --wait --multipacket -s $read_size -o /tmp/camera-test.out -t 1000000 &> /dev/null - if [ $wait -gt 0 ]; then - wrdone=0 - while [ $wrdone -eq 0 ]; do -# pci --list-dma-engines - pci --list-dma-engines | grep "DMA1 S2C" | grep "SD" #&> /dev/null - wrdone=$? - done - pci -w 0x9040 0x201 - fi - - res=`compare /tmp/camera-test.out $read_size "$i" 6 2 6` - if [ $? -eq 0 ]; then - err_cnt=`echo $res | cut -f 1 -d ' '` - if [ "$err_cnt" -ne 0 ]; then - pci -r dma1 --wait --multipacket -o /tmp/camera-test.out -t 1000000 &> /dev/null - cp /tmp/camera-test.out /tmp/camera-test.out.$err_num - err_num=$(($err_num + 1)) - fi - byte_cnt=`echo $res | cut -f 3 -d ' '` - send=$(($send + $byte_cnt * 4)) - errors=$(($errors + $err_cnt * 4)) - else - failed=$(($failed + 1)) - fi - - i=$((i + 1)) - if [ $i -eq $print_iters ]; then - echo "Data send: $send bytes, Errors: $errors bytes, Failed exchanges: $failed" -# pci -r 0x9070 -s 4 - i=1 - fi -done diff --git a/tests/ipecamera/tests/run-and-decode-test.sh b/tests/ipecamera/tests/run-and-decode-test.sh deleted file mode 100755 index d355475..0000000 --- a/tests/ipecamera/tests/run-and-decode-test.sh +++ /dev/null @@ -1,103 +0,0 @@ -#! /bin/bash - -location=/mnt/fast/ -#location="./" -duration=10000000 -wait_frame=1000000 - -TESTS_PATH="`dirname \"$0\"`" -TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`" - -function pci { - PCILIB_PATH=$TESTS_PATH/.. - LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $* -} - -function stop { - usleep $duration - pci -w control 0x201 &> /dev/null -} - -function reset { - pci -r 0x9000 -s 256 > $1.status - $TESTS_PATH/ipecamera/Reset_Init_all_reg_10bit.sh &> $1.reset -} - - -$TESTS_PATH/ipecamera/cfg/Reset_Init_all_reg_10bit.sh &> /dev/null -$TESTS_PATH/ipecamera/frame.sh &> /dev/null -rm -f bench.out - -pci --stop-dma -pci --start-dma dma1 - - -pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null - -pci -r dma1 -s 1 | grep -i "Error (62)" &> /dev/null -if [ $? -ne 0 ]; then - echo "There is data on dma..." - exit -fi - -echo "Starting ... " - -decode_failures=0 -failures=0 -failed=0 -frames=0 -fpga_failures=0 -cmosis_failures=0 -frame_rate_failures=0 - -iter=0 -while [ 1 ]; do - pci -w control 0xa01 &> /dev/null - stop & - - output="$location/test$iter.out" - rm -f $output - pci -r dma1 -o $output --wait --multipacket -t $wait_frame &> /dev/null - - killall -9 usleep &> /dev/null - usleep 100000 - pci -w control 0x201 &> /dev/null - - if [ -f $output ]; then - result=`ipedec -d -v --continue $output 2>&1 | grep -iE "failed|decoded"` - cur_failed=`echo $result | wc -l` - cur_decoded=`echo $result | tail -n 1 | grep -i decoded` - if [ $? -ne 0 -o $cur_failed -eq 0 ]; then - ipedec -d -v --continue $output > $output.decode - decode_failures=$(($decode_failures + 1)) - reset $output - else - cur_failed=$(($cur_failed - 1)) - cur_frames=`echo $cur_decoded | cut -f 2 -d ' '` - failed=$(($failed + $cur_failed)) - frames=$(($frames + $cur_frames)) - fpga_status=`pci -r 0x9054 | awk '{print $2;}' | cut -c 2` - cmosis_status=`pci -r 0x9050 | awk '{print $2;}' | cut -c 3-4` - if [ "$fpga_status" != "f" ]; then - fpga_failures=$(($fpga_failures + 1)) - reset $output - elif [ "$cmosis_status" == "7d" ]; then - cmosis_failures=$(($cmosis_failures + 1)) - reset $output - elif [ $cur_frames -lt 10 ]; then - frame_rate_failures=$(($frame_rate_failures + 1)) - reset $output - elif [ $cur_failed -eq 0 ]; then - rm -f $output - else - reset $output - fi - fi - else - failures=$(($failures + 1)) - reset $output - fi - - echo "Frames: $frames, Failed Frames: $failed, Failed Exchanges: $failures, Failed Decodings: $decode_failures, FPGA Failures: $fpga_failures, CMOSIS Failures: $cmosis_failures, Low Frame Rate: $frame_rate_failures" - iter=`expr $iter + 1` -done diff --git a/tests/new_device.sh b/tests/new_device.sh deleted file mode 100755 index 3545321..0000000 --- a/tests/new_device.sh +++ /dev/null @@ -1,3 +0,0 @@ -#! /bin/bash - -echo "10ee 6028" > /sys/bus/pci/drivers/pciDriver/new_id |