Big redign of model structures

35 files changed, 128 insertions, 2015 deletions

diff --git a/tests/heb/DataTaking.sh b/tests/heb/DataTaking.sh
deleted file mode 100755
index b6046d7..0000000
--- a/tests/heb/DataTaking.sh
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/bash
-
-#Channel 1 --> 05
-#Channel 2 --> 0B
-#Channel 1&2 --> 0F
-#Channel 3 --> 13
-#Channel 4 --> 23
-#Channel 3&4 --> 33
-#ALL --> 3F
-
-#rm *.out
-pci -r dma1 --multipacket -o /dev/null
-
-echo "Start DMA ..... "
-#pci --start-dma dma1
-sleep 0.2
-
-echo "Data Reset ... "
-pci -w 0x9040 000003f1 
-sleep 0.1
-pci -w 0x9040 000003f0 
-
-sleep 0.1
-#echo "Pilot bunch emulator ..... "
-#pci -w 0x9040 400003f0 
-sleep 0.2
-pci -w 0x9040 03f0 
-#pci -r 0x9000 -s 40
-#sleep 0.2
-echo "Start data pci. ..... "
-pci -w 0x9040 00bf0 
-
-sleep 2
-
-echo "Stop data acquis...... "
-pci -w 0x9040 003f0 
-pci -r 0x9000 -s 40
-sleep 0.1
-echo "Enable data transfer.... "
-pci -w 0x9040 007f0 
-exit
-sleep 2
-pci -r dma1 -o run_num_$1.out --multipacket
-sleep 2
-
-pci -w 0x9040 003f0 
-#echo "Status ... "
-
-
-
-pci -r 0x9000 -s 40
-
-   status=`pci -r 0x9050 -s 1 | awk '{print $2$3$4}'`
-    if [ "$status" != "85000021" ]; then
-       echo "--------------------------------->>>> ERROR! ... "
-       error=1
-       exit
-    else 
-       echo " Status 1 -> OK "	
-    fi	
-	
-   status=`pci -r 0x9000 -s 1 | awk '{print $2$3$4}'`
-    if [ "$status" != "01000021" ]; then
-       echo "--------------------------------->>>> ERROR! ... "
-       error=1
-        exit
-    else 
-       echo " Status 1 Readout -> OK "	
-   fi
-    
-status=`pci -r 0x9008 -s 1 | awk '{print $2$3$4}'`
-    if [ "$status" != "01000021" ]; then
-       echo "--------------------------------->>>> ERROR! ... "
-       error=1
-        exit
-    else 
-       echo " Status 2 Readout -> OK "	
-   fi
-
-status=`pci -r 0x9010 -s 1 | awk '{print $2$3$4}'`
-    if [ "$status" != "01000021" ]; then
-       echo "--------------------------------->>>> ERROR! ... "
-       error=1
-        exit
-    else 
-       echo " Status 3 Readout -> OK "	
-   fi
-
-status=`pci -r 0x9018 -s 1 | awk '{print $2$3$4}'`
-    if [ "$status" != "01000021" ]; then
-       echo "--------------------------------->>>> ERROR! ... "
-       error=1
-        exit
-    else 
-       echo " Status 4 Readout -> OK "	
-   fi
diff --git a/tests/heb/cfg/BoardOFF.sh b/tests/heb/cfg/BoardOFF.sh
deleted file mode 100755
index 351bcb8..0000000
--- a/tests/heb/cfg/BoardOFF.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-
-echo " ************************************************************** "
-echo " 			Board OFF"
-echo " ************************************************************** "
-
-pci -w 0x9040 0x01
-sleep 0.5
-
-pci --stop-dma dma1
diff --git a/tests/heb/cfg/BoardOn.sh b/tests/heb/cfg/BoardOn.sh
deleted file mode 100755
index b14c73b..0000000
--- a/tests/heb/cfg/BoardOn.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-echo " ************************************************************** "
-echo "				Start DMA"
-echo " ************************************************************** "
-
-pci --start-dma dma1
-sleep 0.5
-pci  --list-dma-engines
-
-
-echo " ************************************************************** "
-echo " 			Board ON procedure"
-echo " ************************************************************** "
-
-pci -w 0x9040 0x01
-sleep 1
-
-echo "switch ON the power supply  --> FIRST <--"
-echo "Press a key to continue ...."
-read -n 1 -s
-
-echo "Switch ON T/Hs"
-pci -w 0x9040 0x3C1
-pci -r 0x9040 -s1
-
-echo "switch ON the power supply  --> SECOND <--"
-echo "Press a key to continue ...."
-read -n 1 -s
-
-echo "Switch ON ADCs"
-pci -w 0x9040 0x3F1
-pci -r 0x9040 -s1
-sleep 0.1
-
-
-pci -w 0x9040 0x3F0 
-pci -r 0x9040 -s1
-sleep 1
-
-echo " Status ................... "
-pci -r 0x9000 -s 40
-
-
-
-./PLL_conf_calib_3001.sh
-
-echo " Status ................... "
-pci -r 0x9000 -s 40
-
-
-echo " ************************************************************** "
-echo "				Board Ready"
-echo " ************************************************************** "
-
-
-echo " --> remember to run: ./Set_Default.sh"
diff --git a/tests/heb/cfg/README b/tests/heb/cfg/README
deleted file mode 100644
index 125bc0d..0000000
--- a/tests/heb/cfg/README
+++ /dev/null
@@ -1,11 +0,0 @@
- - Initializing
-    ./BoardOn.sh
-    ./Set_Default.sh
-
- - Configuring the size
-    pci -w 9020 0x20 (linear scale)
-
-    * Number of samples are determined by 0x9020 / 0x9028 (0x0e by default)
-    * For each sample is descibed by (184 / 2) * 128 bits
-    * Where most-significant bytes of 4 dwords (128 bit) are iterating 
-    from 0x00 to 0xb8 with step 0x02
diff --git a/tests/heb/cfg/Set_ADC_1_Delay.sh b/tests/heb/cfg/Set_ADC_1_Delay.sh
deleted file mode 100755
index bd8f980..0000000
--- a/tests/heb/cfg/Set_ADC_1_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_4 clock ADC 1 delay... "
-
-upfix=000501
-fixed=4
-
-    hex_val=$(printf "%01x\n" $1)
-    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
-    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_2_Delay.sh b/tests/heb/cfg/Set_ADC_2_Delay.sh
deleted file mode 100755
index d6cdf75..0000000
--- a/tests/heb/cfg/Set_ADC_2_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_5 clock ADC 2 delay... "
-
-upfix=000501
-fixed=5
-
-    hex_val=$(printf "%01x\n" $1)
-    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
-    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_3_Delay.sh b/tests/heb/cfg/Set_ADC_3_Delay.sh
deleted file mode 100755
index 567b977..0000000
--- a/tests/heb/cfg/Set_ADC_3_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_6 clock ADC 3 delay... "
-
-upfix=000501
-fixed=6
-
-    hex_val=$(printf "%01x\n" $1)
-    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
-    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_4_Delay.sh b/tests/heb/cfg/Set_ADC_4_Delay.sh
deleted file mode 100755
index d666595..0000000
--- a/tests/heb/cfg/Set_ADC_4_Delay.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_7 clock ADC 4 delay... "
-
-upfix=000501
-fixed=7
-
-    hex_val=$(printf "%01x\n" $1)
-    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
-    pci -w 0x9060 $upfix$hex_val$fixed
-
diff --git a/tests/heb/cfg/Set_Default.sh b/tests/heb/cfg/Set_Default.sh
deleted file mode 100755
index 0149bf0..0000000
--- a/tests/heb/cfg/Set_Default.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-echo "Set Defaults delay value in the board... "
-
-./Set_FPGA_clock_delay.sh 0
-sleep 0.1
-
- ./Set_Delay_chip.sh 16 16 16 16
-sleep 0.1
-
-./Set_TH_Delay.sh 12
-sleep 0.1
-
-./Set_ADC_1_Delay.sh 5
-sleep 0.1
-
-./Set_ADC_2_Delay.sh 5
-sleep 0.1
-
-./Set_ADC_3_Delay.sh 5
-sleep 0.1
-
-./Set_ADC_4_Delay.sh 5
-
-#pci -w 0x9020 200b20
-pci -w 0x9020 20
-pci -w 0x9028 e
-
-echo " DONE ................ "
-
diff --git a/tests/heb/cfg/Set_Delay_chip.sh b/tests/heb/cfg/Set_Delay_chip.sh
deleted file mode 100755
index 3d15cad..0000000
--- a/tests/heb/cfg/Set_Delay_chip.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-    zero=0
-    hex_val1=$(printf "%02x\n" $1)
-    hex_val2=$(printf "%02x\n" $2)
-    hex_val3=$(printf "%02x\n" $3)
-    hex_val4=$(printf "%02x\n" $4)
-
-    pci -w 0x9080 $zero$hex_val4$hex_val3$hex_val2$hex_val1
-    pci -r 0x9080 -s 1
-    sleep 0.5			    
diff --git a/tests/heb/cfg/Set_FPGA_clock_delay.sh b/tests/heb/cfg/Set_FPGA_clock_delay.sh
deleted file mode 100755
index f4d0f46..0000000
--- a/tests/heb/cfg/Set_FPGA_clock_delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set delay on T/Hs signals... "
-
-upfix=000501
-fixed=0
-
-    hex_val=$(printf "%01x\n" $1)
-    echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`."
-    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_TH_Delay.sh b/tests/heb/cfg/Set_TH_Delay.sh
deleted file mode 100755
index 9a6e58f..0000000
--- a/tests/heb/cfg/Set_TH_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set delay on T/Hs signals... "
-
-upfix=000501
-fixed=3
-
-    hex_val=$(printf "%01x\n" $1)
-    echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`."
-    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/debug/debug.sh b/tests/heb/debug/debug.sh
deleted file mode 100755
index 2db21d4..0000000
--- a/tests/heb/debug/debug.sh
+++ /dev/null
@@ -1,45 +0,0 @@
-#! /bin/bash
-
-SCRIPT_PATH="`dirname \"$0\"`" 
-SCRIPT_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-PCILIB_PATH=${SCRIPT_PATH%/tests/*}
-
-function pci {
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function strip_bad_values {
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/heb_strip_bad_values $*
-}
-
-function request_data {
-    $PCILIB_PATH/tests/heb/debug/request_data.sh $*
-}
-
-while [ 1 ]; do
-    from=`pci --list-dma-engines | grep C2S | sed -s 's/\s\+/ /g' | cut -d ' ' -f 6`
-    to=`pci --list-dma-engines | grep C2S | sed -s 's/\s\+/ /g' | cut -d ' ' -f 8`
-
-    if [ $from -gt $to ]; then
-	buffers="`seq $from 255` `seq 0 $to`"
-    else
-	buffers=`seq $from $to`
-    fi
-
-    echo $buffers
-
-    rm data.out
-    for i in $buffers; do
-	pci --read-dma-buffer dma1r:$i -o data.out
-    done
-
-
-    error=`strip_bad_values data.out | head -n 1 | cut -f 1 -d ':'`
-    if [ $error != "0x1140" ]; then
-	echo "Problems found"
-	exit
-    else
-	echo "Fine"
-	request_data
-    fi
-done
diff --git a/tests/heb/debug/request_data.sh b/tests/heb/debug/request_data.sh
deleted file mode 100755
index b751f5d..0000000
--- a/tests/heb/debug/request_data.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-pci -r dma1 --multipacket -o /dev/null
-
-#echo "Data Reset ... "
-pci -w 0x9040 000003f1 
-sleep 0.1
-pci -w 0x9040 000003f0 
-
-sleep 0.1
-#echo "Pilot bunch emulator ..... "
-#pci -w 0x9040 400003f0 
-sleep 0.2
-pci -w 0x9040 03f0 
-#pci -r 0x9000 -s 40
-#sleep 0.2
-#echo "Start data pci. ..... "
-pci -w 0x9040 00bf0 
-
-sleep 2
-
-#echo "Stop data acquis...... "
-pci -w 0x9040 003f0 
-pci -r 0x9000 -s 40
-sleep 0.1
-#echo "Enable data transfer.... "
-pci -w 0x9040 007f0 
diff --git a/tests/ipecamera/bench.sh b/tests/ipecamera/bench.sh
deleted file mode 100755
index 09edae9..0000000
--- a/tests/ipecamera/bench.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-size=16
-bytes=`expr $size "*" 4`
-
-rm -f bench.out 
-pci --stop-dma dma1
-pci --reset
-
-#pci -w xrawdata_packet_length $bytes
-
-pci --start-dma dma1
-pci -w control 0x1e5
-sleep 1
-pci -w control 0x1e1
-
-sleep 1
-pci -w control 0x3e1
-for i in `seq 1 10`; do
-#    pci -w control 0x1e1
-    pci -w dma1 -s $size "*$i"
-#    pci -w control 0x3e1
-    usleep 100000
-    pci -r dma1 -s $size -o bench.out
-done
-
-pci -w control 0x1e1
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
deleted file mode 100755
index f4afa06..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
+++ /dev/null
@@ -1,326 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204 
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error=1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800 
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    echo "  $status     "
-    error=1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the reset and initialization"
-else
-	echo " Camera READY ........................... OK"		
-fi
-echo 
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
deleted file mode 100755
index 5a4e582..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
+++ /dev/null
@@ -1,325 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204 
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error=1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 2047
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800 
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    error=1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the reset and initialization"
-else
-	echo " Camera READY ........................... OK"		
-fi
-echo 
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
deleted file mode 100755
index 3c4af0e..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
+++ /dev/null
@@ -1,318 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4 
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 11 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 11 bit mode, set ADC resolution 11 bits "
-val=f001 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error =1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab02
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.01
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    error =1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the resetand initialization"
-else
-	echo " Camera READY ........ OK"		
-fi
-echo 
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
deleted file mode 100755
index b04f2cd..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
+++ /dev/null
@@ -1,323 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4 
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 12 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 12 bit mode, set ADC resolution 12 bits "
-val=f002 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error =1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa0f
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-
-#pci -w 0x9000 0xd011
-sleep 0.01
-pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-sleep 0.01
-pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "844950280f0010013ffff111" ]; then
-
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    echo $status
-    error=1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the resetand initialization"
-else
-	echo " Camera READY ........ OK"		
-fi
-echo 
-
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
diff --git a/tests/ipecamera/debug/incomplete.sh b/tests/ipecamera/debug/incomplete.sh
deleted file mode 100755
index 5c80198..0000000
--- a/tests/ipecamera/debug/incomplete.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#! /bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f images.raw
-touch images.raw
-
-echo "Starting the grabber"
-pci --stop-dma
-pci --start-dma dma1
-pci -g -o images.raw --run-time 1000000000 &
-pid=$!
-
-usleep 1000000
-
-for i in `seq 1 100000`; do
-    old_size=`ls -la images.raw | cut -d " " -f 5`
-    echo "Trigger $i"
-    pci --trigger
-    usleep 100000
-    new_size=`ls -la images.raw | cut -d " " -f 5`
-    if [ $old_size -eq $new_size ]; then
-	sleep 2
-	new_size=`ls -la images.raw | cut -d " " -f 5`
-	if [ $old_size -eq $new_size ]; then
-	    echo "Incomplete frame..."
-	    killall -SIGINT pci
-	    break
-	fi
-    fi
-done
-
-echo "Waiting grabber to finish"
-wait $pid
diff --git a/tests/ipecamera/frame.sh b/tests/ipecamera/frame.sh
deleted file mode 100755
index 679817b..0000000
--- a/tests/ipecamera/frame.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout ... "
-pci -w control 3e1
-
-usleep 100000
-
-pci -r dma1 -o bench.out --multipacket
-
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/frame_req.sh b/tests/ipecamera/frame_req.sh
deleted file mode 100755
index bce89c3..0000000
--- a/tests/ipecamera/frame_req.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-#pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout 3... "
-pci -w control 3e1
-usleep 1000000
-pci -w control 1e1
-
diff --git a/tests/ipecamera/grab-hwtrigger.sh b/tests/ipecamera/grab-hwtrigger.sh
deleted file mode 100755
index 0279ab4..0000000
--- a/tests/ipecamera/grab-hwtrigger.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#! /bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function enable_hw_trigger {
-    usleep 100000
-    pci -w control 0xa01
-}
-
-rm -f images.raw
-
-enable_hw_trigger &
-pid=$!
-
-echo "Starting the grabber"
-pci -g -o images.raw --run-time 60000000 --verbose 10 -o /dev/null
-wait $pid
diff --git a/tests/ipecamera/stimuli.sh b/tests/ipecamera/stimuli.sh
deleted file mode 100755
index 33e99e1..0000000
--- a/tests/ipecamera/stimuli.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f bench.out
-
-echo "Set FFFF the frame space .."
-pci -w 0x9180 fff 
-
-echo "Set the number of frames .."
-pci -w reg9170 55
-
-pci --start-dma dma1
-
-echo "Send frame request ... "
-pci -w control 1f1
-usleep 100000
-pci -w control 1e1
-
-
-echo "Enable Readout ... "
-pci -w control 3e1
-pci -r dma1 -o bench.out --multipacket
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/tests/loopback-test.sh b/tests/ipecamera/tests/loopback-test.sh
deleted file mode 100755
index 1c033cc..0000000
--- a/tests/ipecamera/tests/loopback-test.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#! /bin/bash
-
-TESTS_PATH="`dirname \"$0\"`" 
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function compare {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/compare_to_value $*
-}
-
-#size=`expr 1024 "*" 1024`
-size=`expr 1024 "*" 1`
-multiplier=2
-wait=0
-
-/root/pcitool/tests/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma dma1
-pci --start-dma dma1
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1024 -o /dev/null | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
-    echo "There is data on dma..."
-    exit
-fi
-
-failed=0
-send=0
-errors=0
-err_num=0
-
-print_iters=`expr 2 + 1024 '*' 100 / $size`
-
-read_size=`expr $multiplier '*' $size`
-echo "Starting..."
-i=1
-
-pci -w 0x9040 0x201
-
-while [ 1 ]; do
-    if [ $wait -gt 0 ]; then
-	pci -w 0x9040 0x1
-    fi
-    
-    pci -w dma1 -s $size "*0x$i"
-    rm -f /tmp/camera-test.out
-    pci -r dma1 --wait --multipacket -s $read_size -o /tmp/camera-test.out -t 1000000 &> /dev/null
-    if [ $wait -gt 0 ]; then
-	wrdone=0
-	while [ $wrdone -eq 0 ]; do
-#	    pci --list-dma-engines
-	    pci --list-dma-engines | grep "DMA1 S2C" | grep "SD" #&> /dev/null
-	    wrdone=$?
-	done
-	pci -w 0x9040 0x201
-    fi
-
-    res=`compare /tmp/camera-test.out  $read_size "$i" 6 2 6`
-    if [ $? -eq 0 ]; then
-	err_cnt=`echo $res | cut -f 1 -d ' '`
-	if [ "$err_cnt" -ne 0 ]; then
-	    pci -r dma1 --wait --multipacket -o /tmp/camera-test.out -t 1000000 &> /dev/null
-	    cp /tmp/camera-test.out /tmp/camera-test.out.$err_num
-	    err_num=$(($err_num + 1))
-	fi
-	byte_cnt=`echo $res | cut -f 3 -d ' '`
-	send=$(($send + $byte_cnt * 4))
-	errors=$(($errors + $err_cnt * 4))
-    else 
-	failed=$(($failed + 1))
-    fi
-    
-    i=$((i + 1))
-    if [ $i -eq $print_iters ]; then
-	echo "Data send: $send bytes, Errors: $errors bytes, Failed exchanges: $failed"
-#	pci -r 0x9070 -s 4	
-	i=1
-    fi
-done
diff --git a/tests/ipecamera/tests/run-and-decode-test.sh b/tests/ipecamera/tests/run-and-decode-test.sh
deleted file mode 100755
index d355475..0000000
--- a/tests/ipecamera/tests/run-and-decode-test.sh
+++ /dev/null
@@ -1,103 +0,0 @@
-#! /bin/bash
-
-location=/mnt/fast/
-#location="./"
-duration=10000000
-wait_frame=1000000
-
-TESTS_PATH="`dirname \"$0\"`" 
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function stop {
-    usleep $duration
-    pci -w control 0x201 &> /dev/null
-}
-
-function reset {
-    pci -r 0x9000 -s 256 > $1.status
-    $TESTS_PATH/ipecamera/Reset_Init_all_reg_10bit.sh &> $1.reset 
-}
-
-
-$TESTS_PATH/ipecamera/cfg/Reset_Init_all_reg_10bit.sh &> /dev/null
-$TESTS_PATH/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma
-pci --start-dma dma1
-
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1 | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
-    echo "There is data on dma..."
-    exit
-fi
-
-echo "Starting ... "
-
-decode_failures=0
-failures=0
-failed=0
-frames=0
-fpga_failures=0
-cmosis_failures=0
-frame_rate_failures=0
-
-iter=0
-while [ 1 ]; do
-    pci -w control 0xa01 &> /dev/null
-    stop &
-
-    output="$location/test$iter.out"
-    rm -f $output
-    pci -r dma1 -o $output  --wait --multipacket -t $wait_frame &> /dev/null
-
-    killall -9 usleep &> /dev/null
-    usleep 100000
-    pci -w control 0x201 &> /dev/null
-    
-    if [ -f $output ]; then
-	result=`ipedec -d -v --continue $output 2>&1 | grep -iE "failed|decoded"`
-	cur_failed=`echo $result | wc -l`
-	cur_decoded=`echo $result | tail -n 1 | grep -i decoded`
-	if [ $? -ne 0 -o $cur_failed -eq 0 ]; then
-	    ipedec -d -v --continue $output > $output.decode
-	    decode_failures=$(($decode_failures + 1))
-	    reset $output
-	else
-	    cur_failed=$(($cur_failed - 1))
-	    cur_frames=`echo $cur_decoded | cut -f 2 -d ' '`
-	    failed=$(($failed + $cur_failed))
-	    frames=$(($frames + $cur_frames))
-	    fpga_status=`pci -r 0x9054 | awk '{print $2;}' | cut -c 2`
-	    cmosis_status=`pci -r 0x9050 | awk '{print $2;}' | cut -c 3-4`
-	    if [ "$fpga_status" != "f" ]; then
-		fpga_failures=$(($fpga_failures + 1))
-		reset $output
-	    elif [ "$cmosis_status" == "7d" ]; then
-		cmosis_failures=$(($cmosis_failures + 1))
-		reset $output
-	    elif [ $cur_frames -lt 10 ]; then
-		frame_rate_failures=$(($frame_rate_failures + 1))
-		reset $output
-	    elif [ $cur_failed -eq 0 ]; then
-		rm -f $output
-	    else
-		reset $output
-	    fi
-	fi
-    else
-	failures=$(($failures + 1))
-	reset $output
-    fi
-
-    echo "Frames: $frames, Failed Frames: $failed, Failed Exchanges: $failures, Failed Decodings: $decode_failures, FPGA Failures: $fpga_failures, CMOSIS Failures: $cmosis_failures, Low Frame Rate: $frame_rate_failures"
-    iter=`expr $iter + 1`
-done
diff --git a/tests/dma/ipe/bench.sh b/tests/ipedma/bench.sh
index aa7ec25..aa7ec25 100755
--- a/tests/dma/ipe/bench.sh
+++ b/tests/ipedma/bench.sh
diff --git a/tests/ipedma/ipecamera-frame.sh b/tests/ipedma/ipecamera-frame.sh
new file mode 100755
index 0000000..f34fe93
--- /dev/null
+++ b/tests/ipedma/ipecamera-frame.sh
@@ -0,0 +1,48 @@
+#!/bin/bash
+
+TESTS_PATH="`dirname \"$0\"`"
+TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
+
+function pci {
+    PCILIB_PATH=$TESTS_PATH/../../..
+    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci -m ipedma $*
+}
+
+
+rm bench.out
+
+pci --stop-dma dma0r
+#pci --reset
+
+echo "Set packet size 1024 .. "
+#pci -w cmosis_number_lines 1088
+#pci -w xrawdata_packet_length 4096
+pci --start-dma dma0r
+usleep 1000
+
+pci -w 0x90a8 0x0a
+pci -w 0x90a0 0x0a
+
+echo "Send frame request ... "
+# Single frame
+pci -w 0x9040 80000209
+# Stimuli
+#pci -w 0x9040 800002f1
+# Streaming
+#pci -w 0x9040 80000a01
+usleep 100000
+pci -w 0x9040 80000201
+usleep 100000
+
+echo "Enable Readout ... "
+#pci -w control 3e1
+pci -w 0x4 0x1
+
+usleep 100000
+
+pci -r dma0 -o bench.out --multipacket
+
+pci -w 0x9040 80000001
+
+pci --stop-dma dma0r
+
diff --git a/tests/ipedma/ipecamera-test.sh b/tests/ipedma/ipecamera-test.sh
new file mode 100755
index 0000000..e700884
--- /dev/null
+++ b/tests/ipedma/ipecamera-test.sh
@@ -0,0 +1,40 @@
+#!/bin/bash
+
+size=65536
+
+function pci {
+    PCILIB_PATH=`pwd`/../../..
+    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci -m ipedma $*
+}
+
+
+rm -f bench.out
+
+pci --stop-dma dma0r
+
+
+# Configuring DDR
+pci -w 0x9100 0x00001000
+#pci -w 0x9040 0x88000201
+#usleep 90000
+pci -w 0x9040 0x88000201
+
+pci --start-dma dma0r
+
+
+# Clean DMA buffers
+#while [ $? -eq 0 ]; do
+#    pci -r dma0 -s 65536 &> /dev/null
+#done
+
+for i in `seq 1 100`; do
+    pci -r dma0 --multipacket -s $size -o bench.out
+    if [ $? -ne 0 ]; then
+#	pci --stop-dma dma0r
+	exit
+    fi
+done
+
+pci --stop-dma dma0r
+
+../../../apps/check_counter bench.out
diff --git a/tests/ipedma/test.sh b/tests/ipedma/test.sh
new file mode 100755
index 0000000..497e101
--- /dev/null
+++ b/tests/ipedma/test.sh
@@ -0,0 +1,40 @@
+#!/bin/bash
+
+size=65536
+
+function pci {
+    PCILIB_PATH=`pwd`/../../..
+    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci -m ipedma $*
+}
+
+
+rm -f bench.out
+
+echo "Stopping DMA and skipping exiting data..."
+pci --stop-dma dma0r
+echo "Starting DMA..."
+pci --start-dma dma0r
+echo "Enabling data generation..."
+pci -w 0x4 0x1
+
+# Clean DMA buffers
+#while [ $? -eq 0 ]; do
+#    pci -r dma0 -s 65536 &> /dev/null
+#done
+
+echo "Reading the data from DMA..."
+for i in `seq 1 100`; do
+    pci -r dma0 --multipacket -s $size -o bench.out
+    if [ $? -ne 0 ]; then
+	echo "Stopping DMA due to the error..."
+	pci --stop-dma dma0r
+	exit
+    fi
+done
+
+echo "Stopping DMA..."
+pci --stop-dma dma0r
+
+../../../apps/check_counter bench.out
+
+#pci -r 0 -s 32
diff --git a/tests/dma/nwl/bench.sh b/tests/nwldma/bench.sh
index b36c251..b36c251 100755
--- a/tests/dma/nwl/bench.sh
+++ b/tests/nwldma/bench.sh
diff --git a/tests/dma/nwl/cleanup.sh b/tests/nwldma/cleanup.sh
index 5ef568e..5ef568e 100755
--- a/tests/dma/nwl/cleanup.sh
+++ b/tests/nwldma/cleanup.sh
diff --git a/tests/dma/debug/test-iommu.sh b/tests/test-iommu.sh
index 74e3ece..74e3ece 100755
--- a/tests/dma/debug/test-iommu.sh
+++ b/tests/test-iommu.sh
diff --git a/tests/dma/xilinx/xilinx_dma.sh b/tests/xilinxdma/xilinx_dma.sh
index 6aada8b..6aada8b 100755
--- a/tests/dma/xilinx/xilinx_dma.sh
+++ b/tests/xilinxdma/xilinx_dma.sh
diff --git a/tests/dma/xilinx/xilinx_dma_static_mem.sh b/tests/xilinxdma/xilinx_dma_static_mem.sh
index e3ba0f5..e3ba0f5 100755
--- a/tests/dma/xilinx/xilinx_dma_static_mem.sh
+++ b/tests/xilinxdma/xilinx_dma_static_mem.sh