diff options
| -rw-r--r-- | .gitignore | 10 | ||||
| -rw-r--r-- | README.txt | 28 | ||||
| -rwxr-xr-x | download.sh | 61 | ||||
| -rwxr-xr-x | generate.sh | 5 | ||||
| -rw-r--r-- | lists/caucasus.txt | 3 | ||||
| -rw-r--r-- | tracks/README | 46 | ||||
| -rw-r--r-- | tracks/rename.sh | 15 |
7 files changed, 135 insertions, 33 deletions
@@ -1,5 +1,7 @@ -downloads -maps -current-*.txt -cookies.jar .pass +cookies.jar +current-mtb.txt +current-velo.txt +downloads/* +maps/* +tracks/GPX @@ -5,7 +5,6 @@ Problems all Unicode maps to be signed. Non-Unicode maps (from openmtbmap project) work well - Note ==== (Of course you could also define the .img files by folder, and you probably @@ -17,18 +16,19 @@ Note that all 6*.img have to be from the same openmtbmap country file - otherwise only one "country" will show in proper colours. You can instead of deleting all but one typfile replace *.TYP with e.g. clas*.TYP or the full name like clasde.TYP. + * family-id should be the same number as the first 4 digits of the maps (if + you use a different number, you have to adjust the FID inside the .TYP-file). + Note every map on your gps needs a different family-id (else they won't be shown). + * family-name can be set to any value (only use letters and numbers, no + Umlauts or symbols) and will be shown as mapname on the GPS maplist. --–family-id should be the same number as the first 4 digits of the maps (if -- you use a different number, you have to adjust the FID inside the -- .TYP-file). Note every map on your gps needs a different family-id (else -- they won't be shown). - --–family-name can be set to any value (only use letters and numbers, no -- Umlauts or symbols) and will be shown as mapname on the GPS maplist. - -2 b) if you want to have contourlines (altitude lines) included too, just -change the above command from "6*.img" to "6*.img 7*.img" and put the *.img -from the contourline download into the same folder before running the above -command. - +Countours +========= +- By default, this software will generate maps without countour-lines. + * DEM-maps can be generated separately (and only once), e.g. using + map-source and uploaded a separate .img file. Seems work without problems. + * If you want to have contourlines (altitude lines) included in the map, just + change the above command from "6*.img" to "6*.img 7*.img" and put the *.img + from the contourline download into the same folder before running the above + command.
\ No newline at end of file diff --git a/download.sh b/download.sh index 2631ec7..d3ac068 100755 --- a/download.sh +++ b/download.sh @@ -17,18 +17,40 @@ fi if [[ "$list" =~ "velo" ]]; then url_nonu="http://openmtbmap.org/?s2member_file_download=odbl/nonunicode/english" + url_u="http://openmtbmap.org/?s2member_file_download=odbl/english" url="http://ftp5.gwdg.de/pub/misc/openstreetmap/openmtbmap/odbl/velomap" else url_nonu="http://openmtbmap.org/?s2member_file_download=odbl/nonunicode/english" + url_u="http://openmtbmap.org/?s2member_file_download=odbl/english" url="http://ftp5.gwdg.de/pub/misc/openstreetmap/openmtbmap/odbl" fi +if [ -f "cookies.jar" ]; then + if test `find "cookies.jar" -mmin +120`; then + do_auth=1 + else + do_auth=0 + fi +else + do_auth=1 +fi -if [ ! -f "cookies.jar" ]; then +if [ $do_auth -ne 0 ]; then curl -d log="csa7fff" -d pwd="$(cat .pass)" -d rememberme="forever" --cookie-jar ./cookies.jar https://openmtbmap.org/wp-login.php &> /dev/null [ $? -ne 0 ] && { echo "Login failed"; exit 1; } +else + echo "Re-using old authentication cookies" fi +function check { + local fail=$1 + local name="$2" + + [ $fail -ne 0 ] && return $fail + size=$(du -sm "downloads/$name" | awk '{ print $1 }') + [ $size -lt 2 ] && return 1 + return 0 +} mkdir -p downloads for name in $(cat $list); do @@ -37,27 +59,42 @@ for name in $(cat $list); do # Try first non-unicode fail=0 curl -L --cookie cookies.jar "$url_nonu/$name" -o "downloads/$name" &> /dev/null - if [ $? -ne 0 ]; then - fail=1 - else - size=$(du -sm "downloads/$name" | awk '{ print $1 }') - [ $size -lt 2 ] && fail=1 + check "$?" "$name" + fail=$? + + if [ $fail -ne 0 ]; then + echo curl -L --cookie cookies.jar "$url_u/$name" -o "downloads/$name" #&> /dev/null + check "$?" "$name" + fail=$? + fail_nonu=1 fi if [ $fail -ne 0 ]; then + exit 1; rm -f downloads/$name fail=0 curl -o downloads/$name $url/$name &> /dev/null + check "$?" "$name" + + if [ $? -ne 0 ]; then + curl -o downloads/$name $url/asia/$name &> /dev/null + check "$?" "$name" + fi + if [ $? -ne 0 ]; then + curl -o downloads/$name $url/africa/$name &> /dev/null + check "$?" "$name" + fi + if [ $? -ne 0 ]; then fail=1 - else - size=$(du -sm "downloads/$name" | awk '{ print $1 }') - [ $size -lt 2 ] && fail=1 fi + [ $fail -ne 0 ] && echo "*** Failed ***: $name" - [ $fail -eq 0 ] && echo "Unicode version: $name" - else - echo "Non-unicode version downloaded: $name" + [ $fail -eq 0 ] && echo "Unicode version (local language!): $name" + elif [ -n "$fail_nonu" ]; then + echo "Non-unicode english version downloaded: $name" + else + echo "Unicode english version downloaded: $name" fi done diff --git a/generate.sh b/generate.sh index 721e09d..ae4fdad 100755 --- a/generate.sh +++ b/generate.sh @@ -28,7 +28,6 @@ if [[ "$file" =~ "velo" ]]; then name=`basename $file .exe | cut -c 5-` img=maps/velo-$name.img else - typ=thin*.TYP name=`basename $file .exe | cut -c 4-` img=maps/mtb-$name.img fi @@ -41,8 +40,8 @@ fi prepare $file if [ ! -f work/$typ ]; then - echo "Type file is not found, failing out..." - exit 1 + [ -f work/clas*.TYP ] && typ=clas*.TYP + [ -z "$typ" ] && { echo "TYP file is not found (might be naming changed again, check in workdir), failing out..."; exit 1; } fi id=`ls work/6*.img | head -n 1 | cut -c 6-9` diff --git a/lists/caucasus.txt b/lists/caucasus.txt new file mode 100644 index 0000000..bc6cc24 --- /dev/null +++ b/lists/caucasus.txt @@ -0,0 +1,3 @@ +mtbarmenia.exe +mtbgeorgia.exe +mtbiran.exe diff --git a/tracks/README b/tracks/README new file mode 100644 index 0000000..31cf41c --- /dev/null +++ b/tracks/README @@ -0,0 +1,46 @@ +Firmware +======== + - Firmware will be updated automatically if device is connected to WiFi network. This doesn't work on the power cable + and batteries should be present in the system. Once firmware downloaded (on WiFi availability, no message), the update + will be performed during next restart. + +Sync +==== + - There is multiple sources of tracks, routes, and waypoints. + * Garmin/GPX folder (in earlier firmwares this was limited to tracks in GPX/Archive in the main memory + The data will be not loaded from SD and waypoints/routes were not supported. This is not fixed by using MapSource + or old version of BaseCamp. But this seems fixed in the current firmware). + * EDM database which updated when routes/waypoints are stored on device or synchronized using explore.garming.com + + - Easiest way to synchronize. + * Generate a list of .gpx files using basecamp: separate file for each track and route, but one for waypoints. + Names are non-informative and will be as bad in the device if copied as is. Rename script will fix it and organize + structure. + * Basically puts all tracks to 'GPX/Archive' folder which will ensure they are not using active memory. Waypoints + and routes go to directly under 'GPX'. Waypoints/routes goes to SD. Tracks for now should be stored in main memory + as on SD they are not archived but active even if put under 'GPX/Archive'. In the internal memory, it OK. + * Routes will still not preserve the actual path and will be recalculated on the device (but there is no way around + with other synchronization options) + + - osmand + * Single GPX is reasonably imported (and can be easily removed). However, routes are imported as small tracks (consisting + of waypoints only). There is no way to pass the routing either. So, basically best to exclude routes. + + + - Problems + * If archived, there would be no way to sort/filter tracks (they are even not alphabetically sorted). So, it is + quite inconvinient for overview. Might be better solution is to use osmand for planning and Garmin on the trail and + for routes. + + +Garmin Explore +============== + - Routes need to be loaded one by one or the naming will be lost if a single GPX with multiple routes is used. Using + kml input doesn't help either. + * Routes also include waypoints and importing routes and waypoints sequentially will result in dublicates (also on + the device). + - Tracks are not possible import at all. Web site just says 'Invalid media type'. Even if a single track is imported. + KML import results in the same error. + - Tracks/routes from 'GPX/' on the device are synchronized (but not tracks in the 'GPX/Archived'). So, thats probably + the only way to import stuff in the system. + - The web site is also anyway pretty limited in the sense of route analysis (no routing!), etc. diff --git a/tracks/rename.sh b/tracks/rename.sh new file mode 100644 index 0000000..e1504a9 --- /dev/null +++ b/tracks/rename.sh @@ -0,0 +1,15 @@ +#! /bin/bash + +mkdir -p GPX/Archive + +for name in $(ls Route*.gpx Track*.gpx 2>/dev/null); do + new_name=$(cat "$name" | grep -oP "(?<=<name>).*?(?=</name>)" | head -n 1 | sed -e 's/[^0-9a-zA-Z]\+/_/g').gpx + if [[ "$name" =~ ^Route ]]; then + new_name="GPX/$new_name" + else + new_name="GPX/Archive/$new_name" + fi + echo "Renaming: $name to $new_name" + mv "$name" "$new_name" +done +[ -f Waypoints.gpx ] && mv Waypoints.gpx GPX/ |